Carbonization is the core of the charcoal machine production line

In the process of using the charcoal briquette production line to produce charcoal, the key link is carbonization, which is the core of the charcoal production line production mechanism charcoal. Therefore, in the charcoal mechanism charcoal, the majority of users need to pay attention to some details, so as not to lead to abandonment. Produce a poor quality mechanism charcoal.

We all know that the final moisture of the materials dried by the air dryer is about 8%, and the 8% water is the enemy of carbonization. Because water in the mechanism salary bar will seriously affect the quality of carbonization, so the mechanism salary bar is most afraid of moisture, and the tide is a necessary process. For the charcoal machine production line, the tide generally takes 2-3.5 hours, and the soil The kiln takes 10-15 hours, so it is better for customers with larger output to choose charcoal equipment for production. At the same time, we must control the heating rate in the process of carbonization to avoid cracking of the carbon rod.

While controlling the heating rate of carbonization, the supply of oxygen is critical, so to avoid leakage, the carbonization furnace must be tightly sealed to control the amount of oxygen entering the furnace (in the kiln). If the amount of oxygen is too large, it will easily cause a natural excess, and the carbonization rate will be too fast, which will lead to the looseness of the charcoal to be easily broken, and even more likely to cause the charcoal to burn into ash, which directly affects the yield.

Therefore, the details determine the success or failure. If you want to use the charcoal machine production line to make big money, you need high-quality mechanism charcoal. It depends on every detail of the whole production process of the charcoal machine production line. Therefore, the process of producing charcoal in the charcoal machine production line is used. In the details, we must pay attention to any details.

What are the necessary conditions for production mechanism charcoal?

The production mechanism of charcoal must first ensure that the raw material particle size is below 10mm. The raw materials used in the mechanism charcoal machine require dry humidity between 6% and 12%. It is necessary to equip with a good set of dryer equipment to make the raw material humidity reach the best. Production effect. For the mixing of raw materials, there is a certain proportion of formula. In the production process of the charcoal machine, the propellers used in the production lines with different raw materials are also different, and the appropriate propellers are required according to the production. The particle size and hardness of the raw materials should also be matched properly, so that the semi-finished products produced can be of high quality. The temperature control is the final in the mechanism charcoal machine production line. The difference in temperature has a great relationship with the stick or not. If the temperature is properly controlled, the charcoal stick produced will rarely appear to be "fired" or "cracked". Forming and other issues.