High quality mechanism charcoal starts with raw materials

Only good raw materials can produce high-quality mechanical carbon, so high-quality mechanism charcoal starts from raw materials, and the mechanism carbon production equipment needs raw material moisture within 12% and particle size within 8mm. Therefore, it is necessary to have four kinds of equipment such as a pulverizer, a dryer, a bar maker, and a carbonization machine. Production mechanism Charcoal must first start from the quality of raw materials. The control of moisture is an important thing. Water mainly refers to the water contained in charcoal raw materials. The content of water is directly related to the success of charcoal manufacturing. The rate, which is also the importance of the size of the water, is also the reason why the dryer exists in the mechanism of the charcoal machine. The main function of the dryer in the mechanism charcoal machine is to dry the charcoal raw materials to make the charcoal raw materials reach the production quality. How to observe whether the charcoal raw material needs a dryer, a simple method, grab a piece of charcoal raw material by hand, if you feel the humidity is large, the raw materials are read into one piece, then the raw materials need to be dried, otherwise produced Mechanism charcoal can cause cracks, causing the entire production line to fail. Therefore, when the mechanism of charcoal machine is produced, it is necessary to correctly grasp the control of the moisture of the charcoal raw materials, and ensure the drying quality of the dryer for the charcoal raw materials to ensure the high quality of the mechanism of the charcoal machine.

Mechanism charcoal carbon removal rate is affected by those factors

The production mechanism of charcoal customers is most concerned about the difference in the rate of carbon removal of raw materials. Today, for the analysis of the mechanism, the charcoal yield is affected by those factors; the same raw materials for the same charcoal making machine equipment are generally sawdust production mechanism charcoal It takes 2-3 tons to produce 1 ton of mechanical carbon. If the solidity of the raw materials is relatively low, it requires more than 4 tons. In addition, the damage rate is increased to increase the carbon removal rate. The mechanism charcoal is subjected to high temperature and high pressure process, and the density is very high, which is about 3 times that of ordinary wood. It is much higher than ordinary charcoal, and it contains less than 5% ash. The calorific value can be as high as 7000-8000 kcal/KG. This is because the mechanism charcoal has burned and decomposed most of the harmful substances in the carbonization process of the carbonization kiln, so it has high-density characteristics, relatively high calorific value, relatively low cost, and is clean and hygienic in use. Easy to transport and store.

Mechanism of charcoal in life

Nowadays, there is more and more demand for the charcoal industry. In many areas, it is in short supply. Many people have invested in the charcoal machine equipment industry. People often use charcoal for heating, barbecue, and shabu-shabu. Because of its smoke-free taste, high calorific value, and burning time. Long, it is getting more and more popular. Because the surface of the mechanism charcoal has numerous holes in the vertical and horizontal directions, these holes have the function of adsorbing various substances and releasing the adsorbed substances, so they are used as a desiccant. When it is wet, charcoal absorbs moisture, and when it is dry, it will release the absorbed moisture, so that it can effectively adjust the humidity. In addition, charcoal can also eliminate odors and harmful substances in the room. The porosity of the mechanism charcoal charcoal can not only retain the water needed for the roots of the plants, but also improve the permeability and drainage of the soil, and provide a good living space for the microorganisms beneficial to the plants. Therefore, the planting potted soil is mixed with 5%- 10% bean-sized charcoal provides a healthy environment for plants, while garden trees enhance pest and disease resistance.

Peanut Shelling machine Definition

Peanut shelling machine is a popular product developed by our factory according to the current demand of peanut market. Its main feature is that the processed peanut has low breakage rate, clean sorting, good color and less impurities, and the indicators are in line with the world. Export standards. Our factory has strong technical force, complete equipment and advanced technology testing methods. It is highly praised by customers for its high quality products and considerate service. We will, as always, follow the business tenet of "Quality First, Credit First", and let our products enter thousands of households.

E-mail:allenshuliyguo@gmail.com

Peanut shelling machine has a frame, a fan, a rotor, a single-phase motor, a screen (two sizes), a hopper, a vibrating screen, a V-belt wheel and a transmission triangle. After the machine is in normal operation, the peanuts are quantitatively, uniformly and continuously put into the hopper, and the peanut shell is broken under the repeated impact, friction and collision of the rotor. Peanut kernels and broken peanut shells pass through a screen with a certain pore size under the rotating wind pressure and blow of the rotor (the peanuts are first threshed with a large-hole screen, and the cleaned small fruit is replaced with a small-hole sieve for the first Secondary shelling) At this time, the peanut shell and the pellet are subjected to the blowing force of the rotating fan, and the light peanut shell is blown out of the machine body, and the peanut grain is filtered through the sieve to achieve the purpose of cleaning.

Cleaning method for waste plastic in plastic machinery

There are two methods for cleaning waste plastics and drying waste plastics: plastic mechanical cleaning and manual cleaning. Some recycled plastic products can only be cleaned manually, while some plastic products can be cleaned and dried using plastic machinery.

 

         First, the waste plastic is washed in a washing tank, and the waste plastic mixing machine is used to remove the loose dirt adhering to the plastic surface. Finally, the washed pulverized waste plastic is sent to a centrifuge for drying, and dried by two steps of hot air to a residual moisture of ≤0.5%. The waste plastic is sent to the waste plastic PET bottle crusher by the conveyor belt, coarsely pulverized, and then sent to the large separation section to sink the sand and the like into the bottom of the water and be sent away at regular intervals.

Plastic bottle recycling rate has been greatly improved

In the 1990s, discarded plastic bottles were found everywhere. Later, with the continuous improvement of the recycling technology of domestic waste plastic bottles, the army of plastic bottle recycling was born, and the recycling rate of plastic bottles was greatly improved. Now the recycling rate of PET waste plastic bottles has been very high, and even in various industries to compete for regeneration. Plastic bottle resources and mutual price increases, domestic waste plastic bottle resources are becoming increasingly tense, and began to affect related textile, packaging and other industries.

In fact, we believe that the recycling of PET bottle recycling production line, related companies should not focus on the domestic. In some developing countries, such as Latin America, Southeast Asia, Africa, etc., their recycling technology for waste plastic bottles is still very low. As a result, the recycling awareness of discarded plastic bottles in these countries is generally low and there are a large number of available resources. If you can actively enter these markets, on the one hand, recycling plastic bottles will solve the local environmental problems will be supported by the government, on the other hand, the cost of obtaining waste plastic bottles will be lower. There is still a chance to recycle plastic bottles in these places.

E-mail:allenshuliyguo@gmail.com

For the recycling of multinational plastic bottles, the key issues and the cost of transportation, if it can be well controlled, I believe that the prospects are unlimited.

Waste plastic bottles can be converted into highly effective antifungal drugs. The research was conducted by IBM nanomedical researchers and the Singapore Institute of Bioengineering and Nanotechnology. The researchers turned recycled plastic bottles into non-toxic, biocompatible, highly effective antifungal nanofibers that treat resistant fungal infections and bacterial infections such as methicillin-resistant Staphylococcus aureus (MRSA).

According to reports, more than 1 billion people worldwide are infected with fungi every year, ranging from local skin infections (such as athlete's foot) to life-threatening fungal blood infections. When the patient is treated with antibiotics, the immune system is damaged. There is an urgent need to develop highly effective and disease-specific antifungal agents to alleviate the growing problem of drug resistance. Traditional antifungal treatments require intracellular invasion of infection, but it is difficult to target and penetrate the fungal membrane wall. In addition, because fungal metabolism is similar to mammalian cells, existing drugs are unable to distinguish between healthy and infected cells.

Based on this, the researchers used an organic catalytic process to promote the conversion of ordinary plastic materials made of polyethylene terephthalate (PET), in the process of producing new molecules of antifungal agents. These new antifungal agents are self-assembled by a hydrogen bonding method, such as molecular velcro bonds, which form nanofibers in a polymer-like manner to exhibit an active antifungal effect. This new nanofiber is positively charged and can be selectively targeted and attached to a negatively charged fungal membrane based solely on electrostatic interactions. It then prevents it from attacking by breaking down and destroying the walls of the fungal cell membrane.

How good is the quality of charcoal carbonization?

1. The semi-waste salary bar density is high, of course, the higher the density, the better the charcoal charcoal will be;

2. The description of the kiln body should be reasonable. The volume should be 2.7 times long and 1.4 times high and 1.6 meters high. If it is too small, you will lose the advantage of the game if it cannot prevent burning.

E-mail:allenshuliyguo@gmail.com

3. It is necessary to ensure the sealing function of the kiln body, and the gas leakage will constitute the result of the charcoal and the kiln not extinguishing, and the carbonization furnace should also be used to intermittently seal the welded joint adjacent to the furnace (with mud);

4. The carbonization process is not too fast, it is necessary to ensure a good carbonization curve (introduction in the operating instructions), and to maximize the venting of moisture;

5. According to the customer's request, the carbonization principle controlled by the user can be used to consume qualified high, medium and low temperature charcoal. And can understand the carbonization curve, the color and taste of the smoke, because the carbonization result is the guarantee of the completion of the profit;

What is the difference in the price of the mechanism charcoal machine?

For the price of charcoal machine equipment is the most concerned about customers, the first thing to understand the price of charcoal machine is to understand the origin and characteristics of this equipment. The charcoal machine equipment uses the straw in the crops to be pulverized, dried, rod-formed and carbonized, and then made into a mechanism charcoal. Its performance is as good as that of ordinary charcoal, and it is not necessary to cut trees, which is to solve the contradiction between supply and demand. good idea. Because of this, the price of our charcoal machine has become the focus of this industry. And the quality and performance of the charcoal machine equipment also determines the price. Many times the price fluctuations are also due to the upgrade of our technology and the price changes of raw materials.

The role of charcoal mechanism rod heating device

In the use of mechanism charcoal machine equipment, because the bar machine needs to provide heat source to promote the decomposition and fusion of the lignin in the raw material, it is necessary to install a heating ring on the head of the bar machine in order to achieve better bar making effect and better carbonization protrusion on the surface. To stabilize the internal components of the salary bar. The charcoal machine needs to use the heating device to heat the wood chips when making the rod. The heating device is heated by the high temperature and high pressure, and the heating device is heated by the electric heating coil. The principle is that the resistance wire is heated, the power consumption is small, and the heat energy is gathered for a period of time. The material of the addition ring is made of stainless steel. The inside is a high-resistance resistor. The resistance of a heating coil is 2KW. It can instantly heat up and reach the highest temperature. There is three heating coils on a small charcoal machine. The rod making machine is subjected to high temperature and high pressure extrusion molding in the rod making process. Since the heating coil operates at a high temperature, it is inevitably damaged, and therefore, the heating coil is also a wearing part of the charcoal machine.