Carbonization operation method of raw wood carbonization furnace

The original charcoal furnace is a smokeless charcoal production equipment and an important device in the charcoal machine. It can ensure smokeless environmental protection in the production of charcoal and will not cause environmental pollution. Therefore, it is also very important to invest in the original charcoal furnace to produce charcoal.

The original wood charring furnace is ideal for dry distillation, anaerobic carbonization and a high carbonization rate of carbon-containing wood materials (particles under 15mm in volume) such as sawdust, rice husks, peanut husks, crop straws, and bark. The equipment and the hoisting carbonization furnace reasonably adopt advanced technologies for recovering, purifying, and cyclic combustion of combustible gases such as carbon monoxide and oxygen generated during the carbonization of materials.

When using a charring furnace to carbonize logs, pay attention to what charring is an important part of the mechanism charcoal. The charring process of the original charcoal furnace is the core of the manufacturing technology of mechanism charcoal. It's like building a building. Good raw materials are the foundation of the building and the part below the ground. The carbonization technology in the carbonization process is the above-ground part of the building.

Carbonization is divided into three stages: low-temperature exhaust temperature, high-temperature calcination, and cooling. When the salary stick enters the carbonization furnace, it carries about 8% of water, which is the enemy of carbonization. Because the mechanism salary stick is afraid of dampness, water in the salary stick will seriously affect the carbonization quality. The ebb tide time is essential. Tide exhaust time is generally 10-15 hours for earth kiln and 2 -3.5 hours for machine kiln. Long heating time can prevent moisture stick from cracking and ensure the quality of carbonization. When the furnace temperature rises to 300 degrees, a large amount of combustible gas can be generated in the furnace.

As the advantages of raw charcoal furnaces continue to increase, the domestic market competition in China will become increasingly fierce. Under such circumstances, raw charcoal furnaces must be continuously improved and innovated in order to occupy an effective position in the market. .

Website: https://charcoalmachines.com/continuous-carbonization-furnace/

E-mail: allenshuliyguo@gmail.com

The role of charcoal making machine equipment

The charcoal making machine is a device that uses biomass waste to produce charcoal. At the same time, it also promotes the innovation of this charcoal making machine and accelerates its conversion.

The charcoal making machine equipment is a machine that pulverizes the granules within 10mm through a wood chip pulverizer and then puts them into a carbonization furnace for carbonization after drying and shaping. Charcoal making equipment The charcoal produced by the equipment has high density, small volume, and good flammability, and can replace fuelwood and coal. This product is particularly suitable for heating in autumn and winter, heating in greenhouses, or as ordinary living fuel in northern areas.

The full set of equipment for charcoal making machine includes stick making machine, charring furnace, dryer, and other equipment. The environmental protection device of the charcoal making machine equipment is added to fundamentally solve the problem of environmental pollution. The environmental protection device of this equipment is generally configured on the carbonization furnace. The charcoal making machine manufacturer also configures purification and smoke removal devices for customers, which can be effectively recovered. Waste gas and liquid, and can be used again.

Validate production, prove the charcoal making machine and equipment for our independent value, and create our new market. We have verified the new technology, invested in the grassroots, developed in the production trend, and verified us. Valuable energy improvement, the pursuit of our valuable quality research and development, and successful sales in the creation of our novel ideas. To create attractive development, a new field loads our market.

The development of management certification in the brand-new market reputation has been improved, and the verification has been improved. The novel market has been developed in a very unique charm, and we have created our novel equipment. We have co-created our research and development technology in life. The improvement of the law, the smart choices make progress in a good investment, the use of novel independent values ​​for manufacturers, and the successful display has been greatly improved. Shinji's powerful improvements do research for our novel market.

The production of charcoal making machines has been favored and selected by people, and the development of China's industrial environmental protection economy has also been favored by charcoal making machines. Under such development, the future development prospects of charcoal making machines will become better and better.

Website: https://charcoalmachines.com/charcoal-machine-production-line/

E-mail: allenshuliyguo@gmail.com

Production requirements for charcoal machine making equipment

At present, the charcoal making machine equipment is very popular equipment in the current market. In the process of using the charcoal making machine equipment to produce charcoal, users should pay attention to its production quality and also pay attention to the requirements required for the production of charcoal.

So what are the basic requirements for charcoal making machine equipment to produce charcoal?

1. The particle size of the raw material needs to be 3-5mm, which requires the use of a pulverizer. The second requirement is a dry humidity of 6% -12 &. Whether the raw material can be dried depends largely on the dryer, so don't be greedy. Cheap, be sure to choose qualified dryer equipment.

2. The quality of the choice of raw materials should be single or have a fixed ratio. We will teach customers how to match the appropriate ratio according to the user's raw materials.

3. A skilled operator plays a decisive role in making a great success.

4. Adjust the proper temperature.

Good charcoal made with charcoal making machine equipment not only requires the after-sales service of the manufacturer but also requires the customer to continuously understand, explore and practice in order to make real good charcoal.

Website:https://charcoalmachines.com/charcoal-machine-production-line/

E-mail: allenshuliyguo@gmail.com

Energy-saving and environmentally friendly production of charcoal machines

We can hear the word environmental protection in every corner of the world. The production of products by major companies also requires the production of environmentally friendly products. Of course, our charcoal making machine manufacturers will not drag the world. You may also find that the air around us is getting worse and worse.

It was normal to see a blue sky and white clouds when we were young. But now? How many times can we see the blue sky and white clouds in a month? So the environmental protection of the products is becoming more and more popular. In the 21st century, the charcoal making machine will also have another improvement of its own.

When we enter the building materials market, we can see a lot of energy-saving and environmental protection products, which has become the direction of many companies' efforts. Of course, our charcoal making machine industry is also constantly innovating in the field of energy conservation and environmental protection. The charcoal machines we manufacture have diversified functions, humanization, different shapes, artistic, intelligent, and energy-saving environmental protection products. A pretty point.

Some of the well-known brands of intelligent fully automatic charcoal making machines not only adapt to people's needs but also to the development of society, eliminating unnecessary corners and bumps, and optimizing the steps directly, which greatly improves the space of the charcoal machine. In addition, in order to make the user more convenient and comfortable, the design of some charcoal machine equipment is also more user-friendly. From washing with water and warm water adjustment to seat heating and warm air drying, it is not difficult to see that the charcoal machine designer is The service was up and down.

We know that environmental protection is not just a requirement of a certain country. Environmental protection has developed into the theme of our entire humanity. Environmental protection is also more and more important in our society, so the more individuals at this time, the more products with their own characteristics will attract the attention of buyers. In our society today, the charcoal making machine, as a relatively popular product in environmental protection machinery, has received widespread attention, especially the charcoal machine equipment has received the attention of the entire industry.

Now that we are by our side, environmental protection has a certain status in our hearts. Environmental protection has not only reached consensus in the charcoal making machine, sawdust grinder, and straw grinder industry but has it been formed in various industries. The products that people produce have gradually Development to the environmental protection industry. Today, people pay more and more attention to environmental protection, the development of environmentally friendly charcoal machines has become inevitable.

Plastic granulator production process

The production process of the plastic granulator is a process of making the polymer resin and various additives and auxiliary agents into granulated plastics through the processes of metering, bonding, plasticizing and granulating. Plastic particles are semi-finished products of the plastic molding industry. It is also a raw material for extrusion, injection molding, hollow blow molding, foaming, and other molding production. Many friends are very interested in how plastic granulators are produced. Shuliy Machinery introduces the production process of plastic granulators. (Click to view plastic granulator production video)

The production process of plastic granulator is as follows:


Waste plastic pretreatment classification, rough washing-washing-fine washing-drying, automatic feeding, plasticizing of the main machine, auxiliary machine extrusion, cooling, automatic granulation, bagging

The main machine of the plastic granulator is an extruder, which is composed of an extrusion system, a transmission system, and a heating and cooling system. According to the different working principles of each part, the plastic granulator works normally. Its system structure is as follows:

1. Extrusion system: The extrusion system includes a hopper and a mold. The plastic is plasticized into a uniform melt through the extrusion system. The extruder head is continuously extruded by a screw under a predetermined pressure.

2. The function of the transmission system is to drive the screw, which provides the torque and speed required during the screw extrusion process. It usually consists of a motor, a reducer, and a bearing.

3, heating and cooling device heating and cooling is a necessary condition for plastic extrusion processing.

Common problems in the melt conveying of plastic granulators

Most melt transfer or pumping problems in plastic pelletizers are caused by inappropriate metering section designs. Below Shuliy Machinery introduces the common problems and possible solutions of plastic granulators in use.

The first most common problem in the melt conveying of plastic granulators is that the grooves are too deep; the second most common problem is the insufficient length of the metering section. If the groove is too deep, the metering section of the screw can be cooled to reduce the effective depth.

Conversely, if the threaded groove is too shallow, the metering section of the screw can be heated to increase the effective depth of the threaded groove and increase the melt transfer capacity. However, if the depth of the metering section is incorrect, it is best to change the screw design with an appropriate metering section size.

In some cases, simply changing the design of the screw does not effectively improve melt transfer capacity. For example, there is a two-stage extruder screw that must be operated at high outlet pressures. If the second-order length of the screw is insufficient, it may not be possible to use the screw to generate the required high pressure.

Such conditions will cause exhaust gas flow, that is, the molten polymer flows out of the exhaust holes. One possible solution to this problem is to place a gear pump between the extruder and the die. In this method, the gear pump can generate the required head pressure, and only the screw can generate enough pressure to feed the gear pump.

Other possible solutions for exhaust flow are:

1. Reduce pressure.

2. Increase the length of the extruder.

3. Use the internal heating of the screw in the second stage of the screw.

4. Reduce the barrel temperature in the second stage.

What is the development of charcoal produced by charcoal machine

Charcoal is closely related to people's lives. Whether it is agricultural needs, industrial production, or living needs, it is closely related to people's lives. From this, we can see that the charcoal machine production line has a broad market prospect and a stable development space.

The rapid development of charcoal machines has benefited from the continuous growth of the charcoal industry each year. China is a large country of charcoal production and also a country with a large demand for charcoal. The annual production of charcoal reaches about 10 million tons. With the increase of national environmental protection requirements, much natural charcoal The sources of raw materials are cut off, and manufacturers' demand for charcoal resources continues to increase, so the demand for charcoal will continue to increase, so the price of charcoal will also increase steadily.

Nowadays, the development of large-scale charcoal machine production lines, especially charcoal machines, has good development prospects, and it has become a situation of continuous growth every year and has good investment and development potential.
During the current stage of development, there is a large demand for barbecue charcoal in China, Japan, Korea, and the Middle East. These high-end demands are also not met by domestic production of high-quality charcoal, and the demand gap is very large.

In Japan, the annual consumption of high-end barbecue charcoal reaches about 200,000 tons, of which more than 60% need to be used, and China is a larger exporter, and its geographical location is more convenient. Therefore, for the development of China's charcoal machine industry, it Has great appeal. At present, the high-end charcoal products that China exports every year are not high enough to meet the carbon demand of countries around Japan and other countries. Moreover, with the development of the economy, the price of exported charcoal has skyrocketed, with high economic benefits. The charcoal machine production line has high development potential, especially the large-scale production line, which can well meet the demand.

What are the characteristics of new charcoal machine for producing charcoal

Unlike the previous charcoal machine equipment, the environmentally friendly charcoal furnace is a new type of charcoal furnace equipment manufactured by Shuliy Machinery. This equipment organically combines the principle of gasification type continuous carbonization and the principle of drum heating to realize a new process of smokeless carbonization. It is used for charring relatively fluffy raw materials such as rice husks, straw, bagasse, palm shreds, and bark. The effect is very ideal and the yield can be greatly increased.

Shuliy's new charcoal machine carbonization equipment has significant advantages: high carbonization rate, strong production capacity, high-cost performance, and strong practicability. The difference between single and double row carbonizing machines is that the main unit is a drum type. Due to the large diameter of the drum part, it is suitable for the charring of fluffy materials. Needless to say, traditional carbonization equipment encountered many unexpected difficulties in the development process.

The new charcoal machine carbonization furnace uses advanced technologies for recovering, purifying and recycling combustible gases such as carbon monoxide, methane, and oxygen generated during the carbonization of materials. That is to solve the environmental pollution caused by the thick smoke generated during the carbonization process of ordinary carbonization furnaces, and the thermal energy problem required for the charcoal machine equipment, which fully achieves self-sufficiency, improves the continuity and economy of the equipment and makes full use of The agricultural and forestry residues have turned waste into treasures, alleviating the contradiction between the tight supply and demand of forestry resources in our country and contributing more to the greening of the environment.

How to improve the tightness of the carbonization furnace

 As one of the important supporting equipment in the new charcoal machine production line, the charcoal furnace is undoubtedly important in the new charcoal machine. For the production staff, we must pay attention to the rules of the charcoal furnace, carefully master the production process, and ensure the safety and quality of the new charcoal machine production line.

The importance of the carbonization furnace production is to ensure the tightness in the production process. The tightness of the sealing can ensure that the raw materials are well carbonized. If air leakage occurs during production, a large amount of oxygen will enter the carbonization furnace. A sudden increase in oxygen content will cause spontaneous combustion of the fuel rod in the furnace, and the carbonization temperature will rise too fast, which will affect the mechanism of charcoal-fired, such as loose texture, easy to break, and carbonization is not formed. More serious is the excessive combustion of the salary stick, burning into a crushed form, which will increase the production cost of the new charcoal machine and reduce the production quality of the new charcoal machine.

For the new charcoal machine, the carbonization process of the carbonization furnace is the core technology in the production process. The quality of the carbonization is related to the quality of the entire new charcoal machine production line. The carbonization process of the new charcoal machine is divided into three stages: low-temperature exhaust temperature, high-temperature calcination, and cooling. Each stage requires the sealing of the carbonization furnace. Careful attention to work can ensure the high-quality production process of the new charcoal machine. Make the production of the new charcoal machine more perfect.

Nursery seeding machine

The nursery seeding machine adopts a new pot-making process, which is suitable for tomato, pepper, cucumber, watermelon, and other vegetables and fruits, and for cotton and flower seedlings. It has strong adaptability to various soils and a good potting effect.

It has the advantages of small size, small power, lightweight, easy to move in the field, wear resistance, aging resistance, key parts are not rusted, easy to operate, safe and reliable, easy to disassemble and maintain, and other advantages. Improve the germination rate, promote the growth of seedlings, and achieve stable and high yields. Use the machine to make seedlings in the bowl, save water, grow seeds, save labor, reduce diseases and insect pests, and protect the agricultural ecological environment. Pollution-prone green vegetables create good conditions, which is a favorable guarantee for grain, cotton, and vegetable seedlings.

Greenhouse planting plays an increasingly important role in agriculture. The main crops are vegetables and flowers. Nutrient bowls are used in the seedling stage. During soil filling and sowing, the soil filling stage takes time and effort, affecting the efficiency of seedling raising. The existing nutrient bowl seedling machine is suitable for large-scale seedling cultivation, soil filling and seeding are completed at one time, but it is often too expensive to use a large seedling machine, especially a single farmer cannot purchase a large seedling machine, a small nutrient bowl soil machine, suitable for Used by farmers in small batches.

Precautions for buying automatic nursery seeding machine

Precautions for purchase of automatic nursery seeding machine price. We all know that there are only two channels for purchasing automatic nursery seeding machines, either in real stores or online, then which method should be appropriate for automatic nursery seeding machines and what should we pay attention to when buying.

Manufacturers of automatic nursery seeding machines want to develop in the market. Only by combining with advanced technology and constantly producing new products and products, can they be full of vitality. Integrated, networked, digital, and virtualized.

Basically, it is popular to shop online now. In fact, compared with the actual shopping, online is still cheaper, but there is no guarantee in terms of quality. Many people may buy cheap automatic nursery seeding machines when they want I will look for some other channels to buy. Although I save a lot of money, the device itself is not guaranteed, and it is not so easy to use.

The entire equipment of automatic nursery seeding machine is made up of some small parts, not only in the design aspect, the choice of materials is strictly controlled, whether in operation or in the overall operation process, the equipment is highlighted Comprehensive strength, if you buy some inferior equipment in other places, this effect may not be achieved. Therefore, when purchasing an automatic nursery seeding machine, do not ignore the strength of the entire equipment for the price, and do not trust other channels, or you must have a certain degree of judgment, whether it is shopping online or in the market, both It is better to examine clearly.

Rotary dryer machine

Rotary dryer is one of the traditional drying equipment. It has a reliable operation, flexible operation, strong adaptability, and large processing capacity. It is widely used in metallurgy, building materials, chemical industry, coal washing, fertilizer, ore, sand, clay, kaolin, sugar In other fields, the diameter is Φ1000-Φ4000, and the length is determined according to the drying requirements. In the center of the rotary dryer, it is possible to avoid adding a scattering mechanism, and the wet materials entering the drying cylinder are repeatedly picked up and dropped by the copy board on the drum wall and are broken into fine particles by the scattering device during the falling process. , The specific area is greatly increased, and it is fully in contact with hot air and dried.

The machine is mainly composed of a slewing body, lifting plate, transmission device, support device, and seal ring. The dryer is a cylinder that is slightly inclined to the horizontal direction. The material is added from the higher end. The high-temperature hot flue gas and the material flow into the cylinder. With the rotation of the cylinder, the material runs to a lower level due to gravity. One end. A copy board is installed on the inner wall of the cylinder to pick up and sprinkle the material so that the contact surface between the material and the airflow is increased to increase the drying rate and promote the material to move forward. The dried product is collected from the bottom of the bottom.

Scope of application:

1. Chemical industry, miner, metallurgy and other industries, such as ore, slag, coal, metal powder, clay, diatomaceous earth, kaolin.

2. Agriculture, feed, fertilizer industry, such as straw, forage, leaves, fish meal, corn sauce, starch residue, lees, medicinal residue, fruit residue, soy sauce residue, bagasse, peat, organic compound fertilizer, sludge, aquatic product waste, Food factory waste, slaughterhouse waste, organic fertilizer, inorganic fertilizer, ammonium phosphate fertilizer.

3. Dry powdery and granular materials with special requirements. Such as various crystals, light calcium carbonate, activated clay, magnetic powder, graphite, inorganic mud, clay, lime mud, ore mud, phosphate slag, red mud of aluminum plant.

4. Materials that require low-temperature drying and continuous drying in large quantities.

The main purpose:

The combined three-cylinder dryer is mainly used for drying granular materials in a certain humidity range, such as yellow sand used in the dry mortar industry and various specifications of sand used in the foundry industry. Blast furnace slag for the building material cement industry. Small particle size clay, used in the chemical industry for small particle materials that cannot afford chemical changes, and are not afraid of high temperature and smoke pollution. According to the requirements of different industries for the final moisture content of the dried material, the moisture content of the dried material can reach 1-0.5% or less.

The materials entering the dryer should be non-stick walls and poplar boards. The temperature of the gas entering the dryer for heat exchange should not be higher than 750 degrees Celsius. If there are special requirements for high-temperature drying, the inner cylinder and poplar board at the entrance of the dryer can be made of heat-resistant steel.

Rotary drying equipment

Rotary drying equipment is the main equipment of the charcoal production line. It is mainly composed of heat sources, dispersing devices, belt feeders, feeders, rotary drums, transmission parts, belt dischargers, induced draft fans, unloaders, and distribution equipment. The electric cabinet is composed of a rotating cylinder on an active roller. The active roller drives the rotating cylinder to rotate at a low speed by a motor and a deceleration transmission. A feeding port is provided between the heating furnace and the rotating cylinder. A stir-frying blade is arranged in the rotating cylinder. A baffle is connected to the filter cylinder 4. A small hole is formed in the baffle. One end of the filter cylinder is connected to the rotating cylinder and the other end is connected to the material conveying pipe. The slag hole, one end of the cooling cylinder is connected to the material conveying pipe through a blower, and the other end is connected to the discharge port.

Rotary dryer (rotary drying equipment, rotary drying production line) is special drying equipment widely used for drying sawdust, sawdust, wood shavings, bamboo shavings, ginkgo leaves, mulberry leaves, etc. The powder and granular wet sawdust are continuously added into the drying tube by a screw conveyor. In the process of high-speed hot air flow transmission and dispersion, the moisture in the wet material is evaporated to obtain a powder or granular dry product.