Small sawdust dryer equipment

In the process of operating the small sawdust dryer equipment to dry the materials, the efficiency of the machine directly determines the level of production. The only high output will have high efficiency. Why does the same equipment yield very much? Shuliy Machinery passes Constant investigation and summary, the small sawdust dryer equipment in the drying and use of several major misunderstandings.

Small sawdust dryer equipment

The small sawdust dryer equipment includes a hot blast stove, a feed port, a rotating cylinder, a filter cartridge, a material conveying pipe, a cooling cylinder and a discharge port. The rotating cylinder is located on the driving roller, and the driving roller drives the rotating cylinder to rotate at a low speed by the motor and the reduction transmission. There is a feeding port between the heating furnace and the rotating cylinder, and the rotating barrel is provided with a stir-fry blade, and a baffle is arranged at the connection between the rotating cylinder and the filter cylinder 4, and a small hole is opened in the baffle, and one end of the filter cylinder is The rotating cylinder is connected, and the other end is connected with the material conveying pipe. The filter cylinder is provided with a stopper. The bottom of the filter cylinder is provided with a slag discharging hole. One end of the cooling cylinder is connected to the material conveying pipe through a blower, and the other end is connected to the discharging port.

Due to the above structure, the sawdust can be fully dried in the rotating cylinder, and the sawdust is fully dispersed again before entering the material conveying pipe so that the water evaporates quickly, and the stopper can block the impurities in the sawdust to ensure the sawdust entering the material conveying pipe. the quality of. The sawdust enters the small sawdust dryer equipment and the spray pipe and the rotary cylinder work together. The material is boiled and fluidized in the cylinder, and the hot air and the material are fully contacted to complete the drying.

Misunderstandings in the drying of small sawdust dryer equipment:

Misunderstanding 1: The wind speed of the small sawdust dryer equipment is not enough. The lower wind speed will reduce the contact force between the material and the hot air, thus reducing the drying efficiency.

Misunderstanding 2: Excessively lengthening the length of the small sawdust dryer equipment drum, in addition to wasting the land and causing a lot of heat loss, it definitely does more harm than good.

Misunderstanding 3: Install the small sawdust dryer equipment in a tilted form, that is, the near fire end is higher than the far fire end, which will make the material to the far fire end too fast, and reduce the material stored in the drum, thereby reducing Drying efficiency.

Misunderstanding 4: A single method of downstream drying, which will leave the water vapor generated during the drying process of the small sawdust dryer equipment in the slime dryer and cannot be discharged in time to make the already dried materials Reabsorption is absolutely not desirable.