The production line efficiency of the new charcoal machine is related to temperature

With the continuous development of society, people pay more and more attention to the protection of the environment, and at the same time, resources are recycled. More and more people are investing in new charcoal machines. Then these users want to invest in new charcoal machines. Produce a good mechanism of charcoal, and improve the production efficiency of the mechanism charcoal, then the production efficiency of the new charcoal machine is related to temperature?

The charcoal rate of the new charcoal machine differs depending on the type of raw materials. The wood fiber content of the raw material has a positive effect on the yield of charcoal. Density materials can also generally produce dense and robust mechanical charcoal. Although the lower carbonization temperature gives higher carbon removal rate, charcoal is low in quality and corrosive, contains acidic tar substances, and cannot be burned in a clean smokeless flame. The solid carbon content of high-quality commercial carbon should be higher than 80%, which requires us to control the final carbonization temperature above 500 °C. However, as the carbonization temperature increases, the friability of charcoal will increase, and in actual production, when the final carbonization temperature is between 550 ° C and 650 ° C, the brittleness of the mechanism charcoal and solid carbon A desirable balance can be achieved between the contents.

The main products of the new charcoal machine series are: wood chip crusher, straw crusher, carbon powder forming machine, new type, large, medium and small energy-saving dryer, multi-function bar machine, environmentally friendly smokeless carbonization furnace and so on. The new charcoal machine equipment can saw sawdust, branches, rice husks, peanut shells, shavings, bamboo chips, bamboo dust, peanut skin, sunflower seed shell, furfural residue, wine residue, bagasse, corn cob, coconut shell, coffee shell and north and south After the crop straw is pulverized, it is shaped into a semi-finished carbon alloy by high temperature and high pressure plasticization of the forming machine, and carbonized by a carbonization furnace to form a finished charcoal. The carbon powder molding machine is a molding device that uses processed charcoal powder and coal powder as raw materials and is pressed into a rod shape or a cylindrical shape by stirring.

After the installation of the charcoal machine equipment, the load test of more than two hours is started to check whether the installation of the charcoal machine is stable, whether the components are flexible, and whether the equipment is operating abnormally. If there is any problem, it should be solved in time so that it will malfunction during production and affect production. It can be put into production after the load operation check is trouble free.

It can be understood from the above that the production efficiency and temperature of the new charcoal machine are closely related, and the quality of the new charcoal machine production mechanism is also related to the temperature, so the user must strictly control the charcoal production mechanism when using the new charcoal machine. The temperature of the equipment is such that the production efficiency of the new charcoal machine and the quality of the mechanism charcoal can be improved and the economic benefits of the enterprise can be improved.