Sawdust charcoal making machine equipment operation abnormal solution

Large-scale sawdust charcoal making machine equipment cannot be regarded as a production failure when fatigue occurs, because this phenomenon has no effect on the quality of charcoal produced by large-scale sawdust charcoal making machine equipment. At most, we call it an operation abnormality.

Because the abnormal operation of large sawdust charcoal making machine has no effect on the quality of charcoal, most charcoal production personnel will judge that this abnormal phenomenon is irrelevant and will not be reported to the relevant departments for timely resolution.

However, the facts are not what the charcoal production personnel think. Although the fatigue of the charcoal making machine equipment will not affect the quality of the work for a while, it does not mean that the charcoal production after the abnormality will always be safe; as we said above. The output rate of charcoal is high and low. This situation does not affect the quality of charcoal. However, if it is not reported in time, once the generator is warmed to a certain stage, the power supply mechanism of the charcoal making machine may be burned out. Charcoal making machine equipment may be shut down directly and cannot be used for charcoal production. For example, the speed of the charcoal making machine is swallowed slowly. In this case, although the production operation is not affected, if it is allowed to do so, it will definitely affect the unloading of the bearing, which will cause more damage to the charcoal making machine itself.

At the same time, there will be some security problems when operating, so what problems are easy to occur during operation and how to prevent it?

The safety hazard in the production process of large sawdust charcoal making machine equipment is electricity. The rod forming equipment of large sawdust charcoal making machine equipment uses an electric motor, the electric motor uses 380V electric power, and the body is made of steel with good heat dissipation performance. Made of materials, but also conductive, many operators did not notice this in the event of a malfunction, accidentally touched an electric shock event. The solution to this safety hazard is to install a leak protection device at the power supply or install an air protection switch at the bus to avoid accidental electric shock. Secondly, a grounding device should be installed on the motor body to avoid leakage.

The second major safety hazard that is likely to occur in large-scale sawdust charcoal making equipment is fire. The large-scale sawdust charcoal making machine carbonization furnace is formed by carbonizing the formed carbon rod. Generally, the center hole part will have Mars. It is necessary to pour Mars to be completely cooled before carrying out the stacking. Do not accumulate indoors, otherwise it will easily cause fire.