Charcoal making machine equipment correct installation method

The charcoal making machine is a machine in which raw materials such as bamboo sawdust, peanut shells, corn cobs, etc. are pulverized into a pellet of 10 mm by a wood chip crusher, dried by a dryer, and then placed in a carbonization furnace for carbonization. The charcoal production machine produces charcoal with high density, small volume and good flammability, which can replace fuelwood and coal.

This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. The complete set of charcoal making machine includes a rod making machine, a carbonization furnace, a dryer, and other equipment. The following is the correct charcoal making machine installation and operation method provided by Runhe Charcoal Machine Factory:

         1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

         2, the installation should pay attention to the horizontal and vertical of the host and the ground.

         3. After installation, the parts of the body should be tested according to the parts, and the fixing devices such as screws should be secondarily reinforced.

         4. Power on and off the power supply line and control switch of the device.

         5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.