Automatic egg tray machine pulp molding

The main raw material of the pulp egg tray machine is waste paper. The production process of water is a closed cycle. There is no wastewater, exhaust gas, pulp molding products are used. After the waste is completed, it can be recycled as ordinary paper, or even discarded in the natural environment. For example, the ordinary paper is easy to decompose organic matter. Environmentally friendly quality products.

The egg tray machine is the egg tray produced by the machine. It is the key process. It has a decisive effect on the quality, breakage, production energy consumption and production power of the egg tray. According to the principle of the egg tray in the dehydrator, there are three kinds of egg products. The forming method is: vacuum forming in hydroforming and compressed air forming.

The drying method of the egg tray machine is used to dewater and dry the wet egg rack made of machine. The drying method of pulp egg tray machine can be divided into two types: civil and steel structure drying methods. These two drying methods each have their own characteristics and advantages. This is a short introduction. The civil drying method is a long passage covered with bricks that uses heat from burning coal or gas to remove water from the egg rack. The advantages of dry roads in civil buildings are low cost, low investment, and economic durability. Egg storage machines are welcomed by domestic customers. The advantage of the egg washing machine is the rugged internal drying method.

The two parts of the egg machine electrical control system, the electronic control part of the operation is simple, but the stop in the electrical appliance is a bit complicated, there are one or two proximity switches to control the time delay and the time relay to control the motor to stop and turn;

If the proximity switch or time relay fails, the machine cannot complete the work, so the fewer electrical devices, the lower the failure rate.

Another part of the electric control solenoid valve and the cylinder portion of the eggbeater, each solenoid valve has a proximity switch control, the cylinder has a proximity switch control solenoid valve and a solenoid valve control cylinder;

The cylinder of the egg tray machine again controls the dewatering valve to form a mutual restriction of the four parts.

As the price of the equipment, the egg tray has a unique place in the production process. Now we are still a common pulp egg tray. The production technology is mainly used for the egg tray machine of the pulping machine. During the operation of the production line, the molding quality of egg tray production is closely related to many factors and professional technical training and guidance for technical requirements!