Small sawdust charcoal making machine equipment

The small sawdust charcoal making machine uses hardwood sawdust as raw material, and the moisture requirement of the raw material must be controlled within 12%. The small sawdust charcoal making machine equipment has higher requirements on the moisture content of the raw material in the production process. The moisture is generally between 6% and 12%. If the moisture content is <6%, the conversion of raw materials and viscosity are poor, the rods are not strong; if the water content is >12%, the rods are soft and easy to bend and cracks easily, and the density is small.


The moisture content of the raw material is roughly identified by observation and difficulty. First of all, we touch the working separator shell by hand, and the temperature makes the hand feel hot. Secondly, the color of the material just coming out is required to be yellow; * Grab a handful of material and grab it with a palm. Then, let go and let go, and ask for all the raw materials to be scattered. From the actual production experience, it is considered from this point of view whether the moisture content of the raw materials is recognized.


Drying the raw materials of small sawdust charcoal making machine will save more time for our carbon making work, so users who invest in small sawdust charcoal making machine equipment must pay special attention to the mechanism of charcoal technology. The characteristics of the small sawdust charcoal making machine manufactured by Shuliy Machinery are as follows:


The small sawdust charcoal making machine has reasonable design, reliable manufacturing quality, simple structure, convenient operation, small volume, small footprint, labor saving and power saving. The fully automatic control electric heating device designed by the small sawdust charcoal making machine can randomly adjust the dry humidity of the material to ensure stable discharge forming and improve work efficiency.


The main part of the small sawdust charcoal making machine is specially treated with wear-resistant materials, so it can be continuously pressed and produced. It is suitable for press forming of various biomass raw materials and has low energy consumption and high production efficiency. The three bearings of the old-fashioned movement are four, which increases the stability and durability of the machine. Old-fashioned oil-based lubrication is oil-immersed lubrication, as long as it is not short of oil, it can be used for many years. Increasing the pitch increases the amount of feed, which greatly increases the output. The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.