How to maintain the rice mill? How do I troubleshoot?

How to operate and maintain the rice mill?

Boot

1. Before starting, the foreign material in the feeding hopper and the whitewashing room must be cleaned. At the same time, the equipment should be checked for materials that affect the driving or other foreign materials that affect the equipment. There should be no object jamming. exclude.

2. When the machine is turned on, wait for the equipment to run normally when it is empty, and then feed and process. When adjusting the flow and accuracy, pay attention to the power load. Do not overload the control and close the ammeter. The weight of the pressure on the pressure door should be based on a variety of materials and the required accuracy. Make adjustments, or replace the rollers with different weights (When the rice is first started, if the rollers are adjusted too quickly, it will easily cause a blockage.

  Using

(1) Reasonably select supporting power. Generally, the rice mill is required to work under nearly full load, and the motor can fully exert its power under full load. Reasonable selection and matching of the motor can not only ensure that the rice mill can fully function, but also save energy and improve efficiency.

(2) Adjustment of entrance and exit gates. The inlet sluice is widened and the outlet sluice is closed. When the whitening room grains increase, the pressure increases and the beige is crushed, but there is more broken rice. Therefore, the inlet and outlet gates must be well coordinated. The inlet gates control the flow and the outlet gates control the accuracy.

Three, rice knife adjustment. It is mainly to adjust the gap between the rice knife and the sand roller. If the gap is large, the pressure in the white milling room is small, and the frictional force of the rice grains is not strong. Therefore, the rice cannot be finely milled, but the rice yield is higher; otherwise, the accuracy is improved, but the Broken rice rate is higher.

Four, rice sieve adjustment. If you find whole rice mixed with fine bran during work, you should check the rice sieve for rice leakage.

26. After the production is completed, the inlet gate should be closed first, and after one minute of operation, the rice in the rice milling room is milled and the materials are completely removed before closing.