Notes on making charcoal with charcoal machine

Making charcoal with a charcoal machine is simple to say. There are also many tips. It is difficult to make charcoal without mastering the techniques.

First of all, the first process is pulverization. The pulverizer is the simplest. Put the materials into the pulverizer and crush them. It should be noted that when installing the shredder, the base must be hit and fixed with screws, otherwise, the speed of the shredder motor will be very fast, and the constant vibration of the shredder will affect production.

The second step is drying. Many people think that sawdust or sawdust is very dry and does not need to be dried. In fact, the sawdust that ordinary people look very dry does not meet the requirements for making rods. Even if it is brown, grab it with your hands, it feels crispy, and hold it hard. Spreading the sawdust will loosen naturally and will not make a stick, you can make a stick. Pay attention to the size of the fire during the drying process. If the fire is too strong, the sawdust in the pipe may be burned. If the fire is too small, the drying effect may not be achieved. This experience must be accumulated slowly.

The third step is to make rods. The technology of making rods is much more difficult. First of all, the temperature must be adjusted. Generally, the temperature should be adjusted to 280 to 300 degrees at the beginning. After the rods are out, normal production is started and then lowered. Adjust the temperature to about 260 degrees. The reason why the temperature needs to be raised is that at the beginning of production, when the material is fed into the hopper, the temperature will drop sharply by dozens of degrees, and the lowered temperature is just suitable for production. At this time, the front end of the propeller must be manually pressed with a wooden stick. It can be returned to the material and can be produced naturally after normal production, without hands. The rod making machine has a wearing part, which is the propeller. The front end of the propeller is in a high-temperature and high-pressure position. Long-term feeding and forming will cause the front end to wear. At this time, it is necessary to re-weld and grind it before production. The welding rod, the angle and the thickness of the welding mill are all tricks. One of them is that a manufacturer like Shuliy charcoal machine sends technicians to teach welding and grinding technology, and the other is that the charcoal factory staff must work for a long time and slowly explore the experience.

The last step is carbonization. Carbonization has several points. First, when the fire is closed, the furnace door and the near fire mouth must be completely closed, and no trace of air can be penetrated, otherwise, the char will be burned into ashes. The second is to turn on the condenser at the appropriate time to purify the black smoke generated during the conversation and extract the wood tar from it. This also requires some experience.