Precautions for making charcoal with charcoal machine

     Charcoal machine making charcoal is simple to say, and there are many tricks. It is difficult to make charcoal without mastering the technology. First of all, the first process is crushing. The crusher is the simplest, which is to put the materials into the crusher and crush it. It should be noted that when installing the pulverizer, it is necessary to hit the base and fix it with screws, otherwise the speed of the pulverizer motor is fast, and the vibration of the pulverizer will affect the production.

      The second step is drying. Many people think that the sawdust or sawdust is very dry, and there is no need to dry it. In fact, the sawdust that ordinary people seem to be very dry can not meet the requirements for rod making. They must also be dried. The sawdust that really meets the requirements is dark yellow. Even when it reaches brown color, it is grabbed by hand and feels crisp and crisp. Hold it firmly. Spreading the hand saw dust will naturally loosen and will not make a lump, you can make sticks. Pay attention to the size of the fire during the drying process. If the fire is too strong, the sawdust in the pipeline may be burned. If the fire is too small, the drying effect may not be achieved. This experience should be accumulated slowly.

      The third step is to make rods. The technique of making rods is much more difficult. First of all, the temperature must be adjusted. Generally, the temperature should be adjusted to 280 to 300 degrees when starting to do it. Adjust the temperature to about 260 degrees. The reason why the temperature needs to be raised is that when the production starts, the temperature of the feed hopper will drop tens of degrees, and the lowered temperature is just right for production. At this time, the front end of the thruster must be pressed manually with a wooden stick. To make it back to the material, it can be produced naturally after normal production without hands-on. There is a wearing part of the rod making machine, which is the thruster. The front end of the thruster is in a high temperature and high pressure position. Long-term feeding and forming will cause the front end to wear out. At this time, the welding and grinding must be re-welded before production. The welding rod, the angle of the welding mill, and the thickness are all tricks. These first require a technician such as Tongfeng Charcoal Machine to send welding technicians to teach the welding mill technology. Second, it requires the charcoal plant personnel to work for a long time and slowly explore the experience.

      The last step is carbonization. There are several key points of carbonization. First, when closing the fire, the furnace door and the near fire port must be completely closed, and no trace of air can pass through, otherwise the carbon will be burned into ashes. The second is to turn on the condenser at an appropriate time to purify the black smoke produced during the conversation and extract the wood tar. This also requires experience.