Large rotary dryer equipment

With the development of the dryer industry, sawdust and wood powder have become the wooden materials widely used by users today. As a product of the development of the dryer industry, large rotary dryer equipment has become a sought after device for users. For the users, the selection of the equipment in the early stage of production can better carry out the later work. How to choose the large rotary dryer equipment?

First, the reason why the new rotary dryer is favored by many people is that its drying effect is far better than the previous models. In addition, the industry demand for wood powder raw materials is increasingly demanding product quality. High, that is to say, these customers are more willing to choose high-quality wood powder when purchasing wood powder raw materials. However, many rotary dryers are prone to paste phenomenon due to design defects. Unwilling to buy;

Second, some users have just started to use the rotary dryer, often appear paste, blockage, etc., in fact, most of them are caused by unskilled handling, and now with the rise of the automation industry, the new rotary dryer now Most of them are equipped with a special control platform. The operators only need to follow the operation prompts to carry out the corresponding process execution, which greatly reduces the production accidents caused by the improper operation;

 Third, it is to see if the overall function of this rotary dryer is comprehensive. In general, today's users are hard to do business all year round due to the processing of wood powder raw materials. After all, many customers' orders are seasonal, so the rotary dryer can be used all year round. If you don't stop, you must consider the functionality of the rotary dryer. The new rotary dryer produced by Heying Machinery takes into account these conditions. It can not only dry wood powder but also has similar properties to wood powder. Can be processed with a wood powder dryer;

Fourth, because many customers who order wood powder raw materials in the market are in high demand, but the time required for the goods is relatively tight, so the output of the rotary dryer determines whether it is favored by users, and nowadays a variety of rotary drying The machine can't be done too much by the control of the drying machine principle, otherwise the drying effect will be greatly reduced. Now the new rotary dryer produced by Heying Machinery has broken the technical limitation and will be sorted out with the practice data in the future. And the process to improve the size of the rotary dryer will not be far away;

For everyone, buying large-scale equipment such as a rotary dryer is for long-term investment. I also hope that my business is getting better and better, and the business volume is increasing. Therefore, if a rotary dryer does not meet the above requirements, The requirements of the four aspects are basically difficult for the user to use for a long time, and even if there is no advantage in competing with other people's products, the wood powder drying process will be withdrawn early.

Matters for installing a new rotary dryer

During the operation of the user to operate the new rotary dryer equipment to dry the material, the airflow state in the cylinder directly affects the performance of the new rotary dryer equipment. If we improperly install the exhaust pipe, it is likely to cause excessive energy consumption, too long drying time, and even a large safety hazard. Then, what should be the intention when installing the exhaust duct of the new rotary dryer equipment?

New dryer

1. Follow the principle of small resistance joints. When installing the exhaust duct for the new rotary dryer equipment, to prevent it from being connected to the right angle of the main pipe, it must be inclined at an angle in the direction of the exhaust or by rounding to avoid the circulation resistance.

2, to achieve the principle of cross-section accumulation. When we use multiple new rotary dryer equipments to combine exhaust, in order to ensure the smoothness of the exhaust, it is necessary to ensure that the cross-sectional area of the exhaust duct of the dryer should be greater than or equal to the area of the exhaust duct of the front-end dryer. with.

3. When we install the exhaust pipe of the new rotary dryer equipment, we must pay attention to the installation of the induced draft axial fan and the damper in the exhaust main pipe, so that the exhaust pipe can be in a negative pressure state at any time to avoid cross gas or spontaneous combustion. The phenomenon occurs. In addition, in the drying operation, attention should be paid to the cleaning work of the exhaust duct of the new rotary dryer equipment to keep the air venting smooth, and the static pressure is controlled at 7.6 mm water column.

4. For the exhaust vent of the new rotary dryer equipment itself, the oscillating wind page should be set, so that once the gas condensing phenomenon occurs, the damper can be closed to prevent the airflow from flowing back into the dryer.

5. If the new rotary dryer equipment works in a closed room, it is necessary to open an air inlet to ensure that the area is 4-6 times the cross-sectional area of the exhaust duct to ensure that fresh low-humidity air can be replenished in time. When conditions permit, it is recommended that the dryer equipment be installed side by side, and the new rotary dryer equipment, except for the working surface, is enclosed in a room, and the radiant heat of the body and the exchanger is used to heat the fresh cold air. Save energy.

Please pay attention to our website for more details:
https://www.charcoal-machines.com/rotary-dryer.html