With the development of society, the potato slicer gradually entered our lives, but for this large kitchen equipment, we still don't know much about it. How to run the potato slicer, about the accident caused by improper use of the potato slicer? Abound, below, Zhengying Machinery will introduce you to the safe use instructions of the potato slicer, I hope to help everyone.
1. Try cutting before work, and observe whether the specifications of the cut vegetables are the same as the required specifications. Otherwise, the slice thickness or the length of the cut vegetables should be adjusted, and the normal work should be carried out after meeting the requirements.
2, potato slicer installation vertical knife
1 Intelligent potato slicer installation vertical knife: put the vertical knife on the fixed knife plate, the cutting edge is in parallel contact with the lower end of the fixed knife plate, the fixed knife plate pin is on the knife holder, the cutter nut is fastened, and the fixed knife plate can be removed. .
2Other potato slicer installation vertical knife: first turn the adjustable eccentric wheel to make the knife holder go to the bottom dead center, then lift the knife holder up 1/2 mm, so that the vertical knife contacts the conveyor belt, tighten the nut Fasten the vertical knife to the knife holder.
Note: The height of the elevated lift can be mastered according to the vegetables being cut. If the elevated height of the overhead is small, the vegetables may have a knife. If the elevated height of the overhead is too large, the conveyor belt may be cut.
3. Length adjustment of cut vegetables: Observe whether the length displayed on the control panel matches the required length. Press the increase button when increasing the length and the decrease button when reducing the length. Other potato slicer adjustment: turn the adjustable eccentric wheel, loosen the connecting rod fastening screw, the potato slicer cuts the filament to move the fulcrum, from the outside to the inside; when cutting the thick wire, the fulcrum can be moved, from the inside to the outside, after adjusting Tighten the adjusting screw.
Friday, August 23, 2019
Shuliy frozen meat slicer
Shuliy frozen meat slicer is used for frozen boneless meat pieces to slice in a certain thickness without thawing, which can save the thawing process of frozen meat, save time and fast effect, improve work efficiency, and mix with the machine and twist The meat machine and the mixer is used together. The service life of the equipment is widely used in processing plants such as ham sausage, meatballs, canned meat products, hot dogs and sausages. It is necessary equipment for pretreatment of meat products.
Equipment structure:
The frozen meat slicer consists of a motor, an electrical box, a control box, a knife roll, an adjustment block, and a pusher.
working principle:
The knife roll is rotated by a V-belt (435 rpm) to place the piece of meat to be processed into a trough, which is pushed by a cylinder to cut into pieces of meat or meat.
Advantages:
1. The whole machine is made of high-quality SUS304 stainless steel, the whole welded structure, shockproof, low noise, simple structure, beautiful appearance, generous, simple operation, stable machine operation, reliable performance, and convenient maintenance;
2, the design is reasonable, each piece of 2.5-25kg, -4 ~ -18 °C frozen plate meat, frozen meat specifications can be any size within the length × width × height = 700 × 520 × 200 (mm), can be fast Cut directly into a block or sheet, which is the front process of the chopping machine and the meat grinder;
3, with three different heights of the blade, by changing the knife of different heights to make the product slice and cut to change the thickness;
4, the use of this machine can avoid pollution and nutrient loss in the slowing process, to ensure the freshness of the meat. It can also save the ice-cooling process and reduce the user's cooling costs;
5, with a protective device, only in the case of a good cylinder shield and front door, the machine can be started normally, the operation part is equipped with an emergency stop device;
6. The pushing speed is adjustable, the pushing pause time is adjustable, and the returning speed is adjustable. Adjust the timer according to its own conditions, the pusher can automatically push and return;
7. It has a raw meat operation platform, which is convenient and labor-saving;
8. The knife roll is fully enclosed in the end face, and the slide is placed outside the trough, and there is no phenomenon of contaminating raw materials;
9, can be equipped with a standard material truck, there will be no splashing of raw meat when slicing;
10. The electrical protection degree of the electrical part is not lower than IP55, and the insulation level is not lower than B grade;
11, with cleaning function and automatic feeding function.
Equipment structure:
The frozen meat slicer consists of a motor, an electrical box, a control box, a knife roll, an adjustment block, and a pusher.
working principle:
The knife roll is rotated by a V-belt (435 rpm) to place the piece of meat to be processed into a trough, which is pushed by a cylinder to cut into pieces of meat or meat.
Advantages:
1. The whole machine is made of high-quality SUS304 stainless steel, the whole welded structure, shockproof, low noise, simple structure, beautiful appearance, generous, simple operation, stable machine operation, reliable performance, and convenient maintenance;
2, the design is reasonable, each piece of 2.5-25kg, -4 ~ -18 °C frozen plate meat, frozen meat specifications can be any size within the length × width × height = 700 × 520 × 200 (mm), can be fast Cut directly into a block or sheet, which is the front process of the chopping machine and the meat grinder;
3, with three different heights of the blade, by changing the knife of different heights to make the product slice and cut to change the thickness;
4, the use of this machine can avoid pollution and nutrient loss in the slowing process, to ensure the freshness of the meat. It can also save the ice-cooling process and reduce the user's cooling costs;
5, with a protective device, only in the case of a good cylinder shield and front door, the machine can be started normally, the operation part is equipped with an emergency stop device;
6. The pushing speed is adjustable, the pushing pause time is adjustable, and the returning speed is adjustable. Adjust the timer according to its own conditions, the pusher can automatically push and return;
7. It has a raw meat operation platform, which is convenient and labor-saving;
8. The knife roll is fully enclosed in the end face, and the slide is placed outside the trough, and there is no phenomenon of contaminating raw materials;
9, can be equipped with a standard material truck, there will be no splashing of raw meat when slicing;
10. The electrical protection degree of the electrical part is not lower than IP55, and the insulation level is not lower than B grade;
11, with cleaning function and automatic feeding function.
How to install frozen meat slicer
Frozen meat slicers are widely used in the catering industry. How to install the frozen meat slicer Before using it, we need to install it and need to understand the installation process. What is the installation process? You need to understand these procedures before installation.
1. Check if the power cord, plug, and socket of the frozen meat slicer are in good condition.
2. Check that the safety device and operating switch are normal.
3. Make sure the frozen meat slicer is stable and the parts are not loose.
4. After confirming that there is no abnormality, start the trial run of the frozen meat slicer and then proceed.
The frozen meat slicer consists of many parts. During the installation process, we must strictly follow the installation process of the frozen meat slicer. Also, pay attention to safety, especially at the edge of the knife. After installation, we should try to run and check.
1. Check if the power cord, plug, and socket of the frozen meat slicer are in good condition.
2. Check that the safety device and operating switch are normal.
3. Make sure the frozen meat slicer is stable and the parts are not loose.
4. After confirming that there is no abnormality, start the trial run of the frozen meat slicer and then proceed.
The frozen meat slicer consists of many parts. During the installation process, we must strictly follow the installation process of the frozen meat slicer. Also, pay attention to safety, especially at the edge of the knife. After installation, we should try to run and check.
Wednesday, August 21, 2019
Automatic twig charcoal machine production line
About the working efficiency of the automatic branching charcoal machine production line. We strengthen the communication and communication between the two parties, not only to understand the customer's evaluation of the product but more importantly, to enter a new era of "leading the user to consume, let the user rest assured"! To achieve more efficient and low-cost needs of enterprises, improve market response speed, accelerate technological innovation, strictly control quality, reduce production costs, and enable consumers to benefit, and seize more business opportunities in the ever-changing competition.
Automatic charcoal machine production line
When using wood powder as raw material, the wood charcoal machine equipment needs to master the temperature of wood powder and the particle size of wood powder. The quality of raw materials is directly related to the finished product of charcoal, and the particle size of the wood powder is between 3-6mm. The quality of the charcoal produced is also high. At the same time, the finished charcoal produced by the twig charcoal machine equipment is flammable, and the finished charcoal should be safely placed to avoid fire. Through these attentional issues, we should strictly control the raw materials of the charcoal machine through the wood charcoal machine. In this way, the yield of charcoal in the production mechanism can be effectively improved, and higher production capacity can be achieved to create higher economic benefits.
The charcoal mechanism charcoal is faster. The use of the charcoal mechanism is ten times faster than the traditional charcoal speed, and through the technical research of Heying, the environmental performance and energy-saving are convenient to achieve the leading level, saving investment and increasing production, and the customer's income naturally increases.
Automatic charcoal machine production line
When using wood powder as raw material, the wood charcoal machine equipment needs to master the temperature of wood powder and the particle size of wood powder. The quality of raw materials is directly related to the finished product of charcoal, and the particle size of the wood powder is between 3-6mm. The quality of the charcoal produced is also high. At the same time, the finished charcoal produced by the twig charcoal machine equipment is flammable, and the finished charcoal should be safely placed to avoid fire. Through these attentional issues, we should strictly control the raw materials of the charcoal machine through the wood charcoal machine. In this way, the yield of charcoal in the production mechanism can be effectively improved, and higher production capacity can be achieved to create higher economic benefits.
The charcoal mechanism charcoal is faster. The use of the charcoal mechanism is ten times faster than the traditional charcoal speed, and through the technical research of Heying, the environmental performance and energy-saving are convenient to achieve the leading level, saving investment and increasing production, and the customer's income naturally increases.
Machine-made charcoal produced by coconut shell charcoal machine
The use of charcoal is born for environmental protection. If it is not environmentally friendly during the production process, or if the environmental performance of the obtained product is not enough, it will bring a lot of inconvenience to its own sales and production. As the country pays more and more attention to environmental protection requirements, many customers who use charcoal to produce charcoal are facing the problem of soil kiln pollution. Therefore, more and more customers choose coconut shell charcoal machine equipment instead of earthen kiln.
Coconut shell charcoal machine Traditional charcoal is burned by its pollution. With the rapid development of national environmental protection and energy conservation, charcoal is replaced by new environmentally friendly machine-made charcoal products. Mechanism charcoal brings great benefits to society in many aspects. Machine-made charcoal produced by coconut shell charcoal is an energy-saving, environmentally friendly and energy-efficient resource. For machine-made charcoal produced by coconut shell charcoal, two factors directly affect the quality of machine-made charcoal produced by coconut shell charcoal.
The factors affecting the quality of machine-made charcoal produced by coconut shell charcoal machine are mainly the chemical composition of charcoal itself and the carbon content of machine-made charcoal. Let's talk about how these two factors affect the quality of machine-made charcoal produced by coconut shell charcoal.
1. The higher the carbon content of machine-made charcoal, the better its quality and quality. It is determined by three factors: raw material, carbon production technology, and calorific value. That is, it is determined by the chemical composition of charcoal itself.
2. The quality of the coconut shell charcoal machine itself has no direct impact on its products. The better the quality of the coconut shell charcoal machine, the better the quality of the charcoal produced. The high carbon content of the product not only generates a large amount of heat but also has a small surface area for contact with charcoal and air. This surface area includes the outer surface and the surface area of the inner pore.
The coconut shell charcoal machine is a machine that pulverizes into a pellet of 10 mm by a wood chip crusher, which is dried by a dryer and then placed in a carbonization furnace for carbonization. The charcoal produced by the coconut shell charcoal machine has high density, small volume, and good flammability, and can replace fuelwood and coal. This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. Coconut shell charcoal machine complete equipment including bar machine, carbonization furnace, dryer and other equipment.
Coconut shell charcoal machine Traditional charcoal is burned by its pollution. With the rapid development of national environmental protection and energy conservation, charcoal is replaced by new environmentally friendly machine-made charcoal products. Mechanism charcoal brings great benefits to society in many aspects. Machine-made charcoal produced by coconut shell charcoal is an energy-saving, environmentally friendly and energy-efficient resource. For machine-made charcoal produced by coconut shell charcoal, two factors directly affect the quality of machine-made charcoal produced by coconut shell charcoal.
The factors affecting the quality of machine-made charcoal produced by coconut shell charcoal machine are mainly the chemical composition of charcoal itself and the carbon content of machine-made charcoal. Let's talk about how these two factors affect the quality of machine-made charcoal produced by coconut shell charcoal.
1. The higher the carbon content of machine-made charcoal, the better its quality and quality. It is determined by three factors: raw material, carbon production technology, and calorific value. That is, it is determined by the chemical composition of charcoal itself.
2. The quality of the coconut shell charcoal machine itself has no direct impact on its products. The better the quality of the coconut shell charcoal machine, the better the quality of the charcoal produced. The high carbon content of the product not only generates a large amount of heat but also has a small surface area for contact with charcoal and air. This surface area includes the outer surface and the surface area of the inner pore.
The coconut shell charcoal machine is a machine that pulverizes into a pellet of 10 mm by a wood chip crusher, which is dried by a dryer and then placed in a carbonization furnace for carbonization. The charcoal produced by the coconut shell charcoal machine has high density, small volume, and good flammability, and can replace fuelwood and coal. This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. Coconut shell charcoal machine complete equipment including bar machine, carbonization furnace, dryer and other equipment.
Tuesday, July 30, 2019
What are the operating procedures of the new tumble dryer equipment
Now many users of Shuliy have a certain understanding of the new rotary dryer equipment. The skilled operation of the new Shuliy rotary dryer equipment can ensure the drying efficiency of the dryer, and also pay attention to the precautions of the new rotary dryer equipment. This will ensure the normal operation of the dryer, so as to avoid unnecessary trouble, then what are the operating procedures of the new Shuliy rotary dryer equipment?
In the center of the new rotary dryer equipment, it is possible to avoid adding a dispersing mechanism, and the wet material entering the drying cylinder is repeatedly picked up and thrown by the copy board on the wall of the rotating drum, and is broken into small by the dispensing device during the falling process. The particles have a large increase in a specific area and are in full contact with the hot air and dry. The new rotary dryer equipment has a reliable operation, large operation flexibility, strong adaptability, and large processing capacity. It is widely used in metallurgy, building materials, chemical industry, coal washing, fertilizer, ore, sand, clay, kaolin, sugar, etc. Diameter: Φ1000- Φ4000, the length is determined according to the drying requirements.
New rotary dryer equipment
1. For the new rotary dryer equipment, the lifting plate and the rotation speed will make the dryer achieve better heat exchange, and the working effect is better, which can make the new tumble dryer equipment reach high quality, high output and low consumption. Then it is to improve the social and economic benefits of cement production enterprises.
2. This is convenient for the production of machine fertilizer. The whole drying process is carried out in a closed system, which can reduce environmental pollution during the drying process.
3. This can be greater than the centrifugal force of several thousand times in neutral, which can achieve the effect of solid-liquid separation.
4, such dust collection can be used for dust particles in the exhaust gas and relatively thick, and the moisture content is too large, the material is dry to collect dust, are high efficiency and high-temperature resistance and anti-blocking, etc. Characteristic.
5. First of all, it is necessary to select a suitable new type of rotary dryer equipment according to the characteristics of the material. When determining the type of the dryer, a small amount of material is required.
6. When the new rotary dryer equipment is in operation, do not put the handle or other things in the bearing and the gear cover for inspection and cleaning work. It is impossible to remove the safety protection facilities.
7. The drying rate of the new rotary dryer equipment is not high.
8. Therefore, in order to limit the flow speed of the material in the exit direction, only the rotational speed of the drum is limited to 99.
The above is the operation of the new tulip rotary dryer equipment, which requires the users of shuliy to understand and learn, so as to operate the new rotary dryer equipment correctly, ensure the drying efficiency and effect of the dryer, and create better for themselves. Economic benefits.
Sawdust dryer equipment drying materials should pay attention to matters
The small wood chip dryer equipment is to make full use of the wood waste residue from the processing of these woods. These things are not worth anything in the eyes of ordinary people, but the sawdust dryer can convert these inconspicuous things into biomass. Fuel or wood product base material. The use of small wood chip dryer equipment is simple and can be used by both self-employed and enterprises. Sawdust drying is also a good entrepreneurial project, which can not only increase the income of farmers but also reduce environmental pollution to waste. The small wood chip dryer equipment has reasonable planning, high output, low failure rate, and easy operation and protection.
1. The combination of material and moisture is the factor for determining the difficulty of dialysis. Together, it also determines the energy consumption level and the length of time spent in the small wood chip dryer equipment. This condition is related to small wood chip dryer equipment. The selection is inseparable. For example, for some materials that are not easy to be boring, it is mainly necessary to give a longer staying time instead of strengthening the external boring conditions.
2, the shape of the material, the material can exist in a variety of shapes, such as large-scale molded wood, ceramic products or other sheet-like, fiber pile, granular, or even liquid materials, these can As a boring material in the industry, the selection of small wood chip dryer equipment should also be considered according to the shape of the material.
3, the physical properties of the material itself, the physical properties of the material itself generally have density, bulk density, hot melt, and the adhesion of the material, etc., may be the adhesion of the bump, it is baked for small wood chips The operation of the dryer equipment has a direct impact, and when the adhesion is severe, the boring process cannot be performed.
4, the demand to pay attention to the material in the boring process of some matters, these factors mainly have the heat sensitivity of the heat of time, some materials will change some changes when heated, such as discoloration, decomposition, and transformation, etc., other materials in the boring process due to Shortening will cause the material to deform or crack, and then the quality of the material will be reduced or even invalidated.
Subscribe to:
Posts (Atom)