Sawdust briquetting machine can not normally discharge the solution

Some customers who have just started to use the sawdust briquetting machine to produce mechanism carbon have encountered the mechanism that the charcoal machine can not be discharged normally. Don't panic at this time. Hongrui Machinery Design Department will introduce the solution in detail for everyone:
First: the diameter of the head screw and the second screw of the sawdust briquetting machine are not well matched, and may be too far forward;
Second: the sawdust briquetting machine is not exhausted;

Third: the forming cylinder is not tightened or loose, and the screw head collapses and wears seriously, which also causes this phenomenon;
Fourth: the production temperature of the sawdust briquetting machine is too low, and the screw head is too large, the extrusion material can not be digested immediately at the forming port, which causes a very large friction force between the raw material and the barrel wall, which makes it difficult for the charcoal machine to be normal. Discharge, and will go backwards.

Want to know about our machine, you can send the question to E-mail: allenshuliyguo@gmail.com