Charcoal making machine equipment motor maintenance method

Charcoal making machine equipment is a device that uses biomass waste as raw material to produce charcoal. Users of charcoal making machine equipment can increase the feeding amount to increase the production capacity when operating the charcoal making machine, achieve faster production efficiency, and produce larger Profit, and in the normal operation of the charcoal making machine equipment, usually the motor needs the operator to carry out detailed observation and sensitive hearing to judge the maintenance, and the correct maintenance method is also a lot, then how to make the motor of the charcoal making machine equipment correct? maintain?

1. The temperature of the motor of the charcoal making machine should not exceed the allowable limit during normal operation. The operator of the charcoal briquette machine should always pay attention to monitor the temperature rise of each part during the operation.

2. Monitor the load current of the charcoal briquette machine motor. When the motor fails, the stator current will increase sharply and the motor will overheat. In the case of a large-scale charcoal production line, an ammeter should be installed to monitor the motor load current when using a larger power motor. The load current of the motor of the charcoal making machine should not exceed the current value specified on the nameplate.

3. Pay attention to the smell, vibration, and noise of the motor. The winding will emit an insulating burnt smell due to the high temperature. Some problems with charcoal making machines, especially mechanical failures, quickly react to vibrations and noises, so when you smell the burnt smell or notice abnormal vibration or rubbing, especially large "click" or other noise A power outage should be checked immediately.

4. After checking the bearing heat and oil leakage of the charcoal making machine equipment, regularly change the lubricating oil. Generally, when replacing the lubricating oil, the bearing and the bearing cap are cleaned with kerosene and then washed with gasoline. Rolling bearing grease should not exceed 70% of the bearing chamber volume.

The above is the method of motor maintenance of the charcoal making machine equipment. When the user operates the charcoal making machine equipment to produce charcoal, the maintenance equipment can be maintained according to these, so that it can better operate, improve the production efficiency and effect, and simultaneously produce High-quality charcoal brings better economic benefits to yourself.