What are the advantages of carbonization in an anthracite carbonization furnace?

The smokeless carbonization furnace is important equipment in the mechanism of charcoal production. The environmental protection production of the equipment has been recognized by people. The carbonization process of the anthracite carbonization furnace is also the core of the mechanism of charcoal production. What advantages does the production of smokeless carbonization furnace have?

The carbonization technology in the carbonization process of an anthracite carbonization furnace is the above-ground part of the building. The carbonization is divided into three stages: low-temperature discharge temperature, high-temperature calcination, and cooling and cooling. The salary bar has about 8% water when it enters the carbonization furnace. This water is the enemy of carbonization. Because the mechanism salary bar is afraid of getting wet, the water will seriously affect the quality of carbonization in the salary bar. Because the time of the tide is essential. Tidal time is essential. The drainage time is generally 10-15 hours for the earthen kiln and 2-3.5 hours for the mechanism kiln. The long heating time can prevent the salary bar from being cracked by moisture and ensure the quality of carbonization. When the furnace temperature rises to 300 degrees, a large amount of combustible gas can be generated in the furnace. Each kilogram of raw material is logically equivalent to produce three cubic methane gas. These gases can be used to heat the furnace. The exhaust heat source for drying more than 400 degrees for the heat preservation calcination stage to seal the oxygen-free closed fire can be taken from spontaneous combustion or water cooling. After the charcoal is discharged from the kiln, it must be ventilated and then charcoal to prevent carbon dioxide poisoning. The charcoal from the kiln should be placed outdoors for more than 8 hours. Prevent resurgence and fire.

The charcoal carbonization furnace equipment utilizes the principle of dry distillation carbonization to decompose and decompose the fuel rod in the furnace to form combustible gas, tar, and charcoal. The utility model adopts a mobile steel plate structure, and the exhaust pipe at the top of the furnace is sequentially connected with the tar separator and the induced draft fan, and has the advantages of unique structure, large effective volume, advanced carbonization process, short cycle, high output, good environmental protection, and long service life. . Our factory can also produce various high, medium and low-temperature charcoal furnaces for customers.

Smokeless charcoal carbonization furnace equipment finished fiber rod is the use of sawdust, crop straw (corn straw, soybean straw, sorghum stalk, cotton stalk, rape stalk, peanut stalk, sunflower stalk), chaff, grass, shrub branches, bamboo and wood The truncated, bamboo chips, bagasse and the like are used as raw materials, and are extruded at a high temperature using a fiber rod device. The product has high density, small volume and good flammability, and can replace fuelwood and coal. The general product has an outer diameter of 50-60mm and a hole diameter of 15-20mm. It has a hollow four-corner or hexagonal column shape. It can also be made into a spherical shape, a granular shape, or a honeycomb shape. This product is especially suitable for heating in the northern part of the country in autumn and winter, heating in greenhouses or fuel for ordinary life.

The above is the advantage of the anthracite carbonization furnace in the charcoal production mechanism charcoal, which can make good use of biomass waste to produce mechanism charcoal, and the smokeless carbonization furnace realizes smokeless environmental protection in production, so the users can use it with confidence. An anthracite carbonization furnace produces charcoal.