We must pay attention to safe production during the production process of Charcoal or Coal briquette machine. Let's talk to our customers and friends in detail:
1. Check the lubrication of the equipment and the tightness of the V-belt before starting the machine.
2. Adjust the amount of coal and the moisture of the material according to the index of the ammeter. Ensure that the moisture content of the material is controlled at 12%-14% to ensure the forming strength of the coal rod.
3. When Charcoal or Coal briquette machine is working, the operator should control the amount of coal to be fed to avoid material breakage or overfeed. It is strictly forbidden to stand at 10m in front of the head of the molding machine to avoid spraying and injuring people.
4. It is forbidden to use materials such as iron rods and high hardness tools in Charcoal or Coal briquette machine to avoid being damaged by Charcoal or Coal briquette machine. When the stick is stirred in, immediately let go, so as not to hurt people, and stop cleaning.
5. When the head hole is blocked, it should be cleared at any time.
6. Charcoal or Coal briquette machine should empty the material when it is out of service for more than 2 hours. And add a small amount of water when you re-drive.
7. Before installing the machine head, clean the coal on both ends of the machine head and the discharge shell assembly, and then install the clamping device.
8. If the startup is unsuccessful twice during the start of the drive, the start should be stopped. To find out the cause, drive again after troubleshooting. It is these eight procedures that help the safe production of the Charcoal or Coal briquette machine.
Thursday, April 18, 2019
How can a carbonized branch sawdust be pressed?
How do you make charred tree sawdust into a sheet or a sphere? The charcoal block made will have a lower burning value than other materials.
Machine-made charcoal making machine equipment generally first pulverizes the raw materials, then presses the block (this process does not require the addition of binder), and finally carbonizes into a machine-made charcoal piece or another shape through a carbonization furnace, which is the first briquetting block. The principle of post-carbonization. Most people also use this manufacturing process.
Another process of forming after carbonization
After the charcoal sawdust is first carbonized, it can be pulverized by a pulverizer to a suitable granule, and then the ash is added to the binder and pressed through a briquetting machine or hookah charcoal making machine. The purpose of deashing is to maintain heat. value. This principle is to form after carbonization. The principle is different for different processes, but the constant value is the combustion value. Branches and sawdust can be said to be one of the best and the easiest to form in raw materials. So don't worry about its low combustion value.
Machine-made charcoal making machine equipment generally first pulverizes the raw materials, then presses the block (this process does not require the addition of binder), and finally carbonizes into a machine-made charcoal piece or another shape through a carbonization furnace, which is the first briquetting block. The principle of post-carbonization. Most people also use this manufacturing process.
Another process of forming after carbonization
After the charcoal sawdust is first carbonized, it can be pulverized by a pulverizer to a suitable granule, and then the ash is added to the binder and pressed through a briquetting machine or hookah charcoal making machine. The purpose of deashing is to maintain heat. value. This principle is to form after carbonization. The principle is different for different processes, but the constant value is the combustion value. Branches and sawdust can be said to be one of the best and the easiest to form in raw materials. So don't worry about its low combustion value.
Monday, April 15, 2019
Charcoal making machine equipment correct installation method
The charcoal making machine is a machine in which raw materials such as bamboo sawdust, peanut shells, corn cobs, etc. are pulverized into a pellet of 10 mm by a wood chip crusher, dried by a dryer, and then placed in a carbonization furnace for carbonization. The charcoal production machine produces charcoal with high density, small volume and good flammability, which can replace fuelwood and coal.
This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. The complete set of charcoal making machine includes a rod making machine, a carbonization furnace, a dryer, and other equipment. The following is the correct charcoal making machine installation and operation method provided by Runhe Charcoal Machine Factory:
1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2, the installation should pay attention to the horizontal and vertical of the host and the ground.
3. After installation, the parts of the body should be tested according to the parts, and the fixing devices such as screws should be secondarily reinforced.
4. Power on and off the power supply line and control switch of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. The complete set of charcoal making machine includes a rod making machine, a carbonization furnace, a dryer, and other equipment. The following is the correct charcoal making machine installation and operation method provided by Runhe Charcoal Machine Factory:
1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2, the installation should pay attention to the horizontal and vertical of the host and the ground.
3. After installation, the parts of the body should be tested according to the parts, and the fixing devices such as screws should be secondarily reinforced.
4. Power on and off the power supply line and control switch of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
Working principle of the whole production line of charcoal making machine equipment
The complete equipment of charcoal making machine is generally divided into four processes: crushing equipment, drying equipment, charcoal molding equipment, and carbonization equipment. It is also the basic equipment for making charcoal. The working principle of the whole production line is also based on the four machines. Shuliy mechanical charcoal making machine manufacturers are tireless to tell the user.
First of all, the working principle of the pulverizing equipment is to pulverize the material into fine particles of 3 mm or less by utilizing the inertia and centrifugal force generated by the rapid rotation of the blade.
Second, it depends on the size of the moisture contained in the raw material. The moisture content of the raw materials is generally required to be less than 12%, but also greater than 6%. When drying raw materials, we can first dry the raw materials with large moisture content in the open air drying field for 1~2 days, and let the surface water evaporate to reduce the heat drying time and fuel consumption. Then, we put the full-size raw materials into a hot air dryer to dry material with a water content of less than 12%. The drying temperature is generally about 160~250 °C.
Again, the raw material rod is completed in a molding machine (or a bar machine). The forming cylinder of the molding machine has a heating ring outside, which can raise the temperature of the forming cylinder to about 350. In order to ensure the density of the charcoal stick is large, the surface is smooth, and there is no obvious crack. We can choose the right molding temperature according to the type of raw materials and moisture content. Its level must be determined through field tests. Generally speaking, if we assume that the auger is qualified and the water content of the raw material is between 6 and 12%, we can control the final temperature of the sawdust, wood sawdust, wood flour, and bamboo raw materials to 260~ Between 320 ° C.
Finally, the final semi-finished product that is formed from the raw material is charcoal, then we should burn or calcinate the salary bar through the earth kiln to become qualified charcoal. The carbonization process of medium and low-temperature carbon can generally be divided into the following three temperature segments.
Article for charcoal making machine here
1. Drying stage
From the start of ignition to the temperature of the furnace rising to 160 ° C, the moisture contained in the salary bar is mainly based on the amount of external heating and the heat generated by the combustion of its own fuel bar. The chemical composition of the salary bar has hardly changed.
2. The initial stage of carbonization
At this stage, the heat is generated by the burning of the salary bar itself, so that the temperature of the furnace rises to between 160 and 280 °C. At this time, the wood material undergoes a thermal decomposition reaction, and its composition begins to change. Among them, the unstable composition, such as hemicellulose, decomposes to form CO2, CO and a small amount of acetic acid.
3. Comprehensive carbonization stage
The temperature at this stage is 280 to 400 ° C. During this stage, the wood material undergoes thermal decomposition rapidly, and a large number of liquid products such as acetic acid, methanol, and wood tar are formed. In addition, flammable gases such as methane and ethylene are produced, and these flammable gases are burned in the furnace. Thermal decomposition and gas combustion produce a large amount of heat, which causes the furnace temperature to rise. The wood material is dry distilled to char at high temperatures.
First of all, the working principle of the pulverizing equipment is to pulverize the material into fine particles of 3 mm or less by utilizing the inertia and centrifugal force generated by the rapid rotation of the blade.
Second, it depends on the size of the moisture contained in the raw material. The moisture content of the raw materials is generally required to be less than 12%, but also greater than 6%. When drying raw materials, we can first dry the raw materials with large moisture content in the open air drying field for 1~2 days, and let the surface water evaporate to reduce the heat drying time and fuel consumption. Then, we put the full-size raw materials into a hot air dryer to dry material with a water content of less than 12%. The drying temperature is generally about 160~250 °C.
Again, the raw material rod is completed in a molding machine (or a bar machine). The forming cylinder of the molding machine has a heating ring outside, which can raise the temperature of the forming cylinder to about 350. In order to ensure the density of the charcoal stick is large, the surface is smooth, and there is no obvious crack. We can choose the right molding temperature according to the type of raw materials and moisture content. Its level must be determined through field tests. Generally speaking, if we assume that the auger is qualified and the water content of the raw material is between 6 and 12%, we can control the final temperature of the sawdust, wood sawdust, wood flour, and bamboo raw materials to 260~ Between 320 ° C.
Finally, the final semi-finished product that is formed from the raw material is charcoal, then we should burn or calcinate the salary bar through the earth kiln to become qualified charcoal. The carbonization process of medium and low-temperature carbon can generally be divided into the following three temperature segments.
Article for charcoal making machine here
1. Drying stage
From the start of ignition to the temperature of the furnace rising to 160 ° C, the moisture contained in the salary bar is mainly based on the amount of external heating and the heat generated by the combustion of its own fuel bar. The chemical composition of the salary bar has hardly changed.
2. The initial stage of carbonization
At this stage, the heat is generated by the burning of the salary bar itself, so that the temperature of the furnace rises to between 160 and 280 °C. At this time, the wood material undergoes a thermal decomposition reaction, and its composition begins to change. Among them, the unstable composition, such as hemicellulose, decomposes to form CO2, CO and a small amount of acetic acid.
3. Comprehensive carbonization stage
The temperature at this stage is 280 to 400 ° C. During this stage, the wood material undergoes thermal decomposition rapidly, and a large number of liquid products such as acetic acid, methanol, and wood tar are formed. In addition, flammable gases such as methane and ethylene are produced, and these flammable gases are burned in the furnace. Thermal decomposition and gas combustion produce a large amount of heat, which causes the furnace temperature to rise. The wood material is dry distilled to char at high temperatures.
Thursday, April 11, 2019
Fruit and vegetable washing machine performance characteristics
In the era of the extensive use of pesticides, various chemical preservatives, preservatives, and various growth hormones, each family is completely in a state of non-resistance before this, and can only passively accept it. In the process of chemical poisonings, such as various cancers and cardiovascular diseases, it is related to the long-term intake of excessive pesticides and various chemicals. Now with the fruit and vegetable washing machine, each family that owns her can have a kind of Advanced protection means that you can eat a lot of pesticides and various chemicals in this life, you can get a lot of diseases, and only the health of life in life is priceless.
The fine fruit and vegetable washing machine is made of stainless steel SUS304/2B material except for the standard parts such as motor and bearing, which fully meets the requirements of export food hygiene. A bubble generating device is arranged in the device to make the material roll state, remove the pesticide effect on the surface of the product, and at the same time, an appropriate amount of the medicament can be added for disinfection and fixation. The floating object can overflow from the overflow tank, and the sediment is discharged from the sewage outlet to Achieve the purpose of the washing machine.
Fine fruit and vegetable washing machine range:
The fine fruit and vegetable washing machine is widely used in the processing of fruits, vegetables such as granules, leaves, and products such as strawberries, apples, oranges, vegetables, fruits, and aquatic products. It is especially suitable for growing in the soil.
Note: The size of the equipment depends on the customer's production capacity!
Fine fruit and vegetable washing machine features:
1. Simple operation, functional and practical
Cleaning and draining are controlled with only 2 knobs for easy operation.
Two streams of water are available for selection and are practical.
2. Ozone sterilization and pesticide degradation
The machine has the functions of ozone sterilization and pesticide degradation, can kill the pesticides on the vegetables and remove the pesticides. It has the characteristics of high efficiency and no pollution and is the first choice for true green cleaning and disinfection.
3. Separate washing basket
With the unique professional structure design, the washing basket can be easily taken out. In this way, after washing, the disinfected vegetables can be directly poured into the wok with the washing basket to avoid secondary pollution and more convenient.
4. Easy maintenance and economy
The disinfection effect can be achieved without various disinfecting detergents, and the use cost is low.
The fine fruit and vegetable washing machine is made of stainless steel SUS304/2B material except for the standard parts such as motor and bearing, which fully meets the requirements of export food hygiene. A bubble generating device is arranged in the device to make the material roll state, remove the pesticide effect on the surface of the product, and at the same time, an appropriate amount of the medicament can be added for disinfection and fixation. The floating object can overflow from the overflow tank, and the sediment is discharged from the sewage outlet to Achieve the purpose of the washing machine.
Fine fruit and vegetable washing machine range:
The fine fruit and vegetable washing machine is widely used in the processing of fruits, vegetables such as granules, leaves, and products such as strawberries, apples, oranges, vegetables, fruits, and aquatic products. It is especially suitable for growing in the soil.
Note: The size of the equipment depends on the customer's production capacity!
Fine fruit and vegetable washing machine features:
1. Simple operation, functional and practical
Cleaning and draining are controlled with only 2 knobs for easy operation.
Two streams of water are available for selection and are practical.
2. Ozone sterilization and pesticide degradation
The machine has the functions of ozone sterilization and pesticide degradation, can kill the pesticides on the vegetables and remove the pesticides. It has the characteristics of high efficiency and no pollution and is the first choice for true green cleaning and disinfection.
3. Separate washing basket
With the unique professional structure design, the washing basket can be easily taken out. In this way, after washing, the disinfected vegetables can be directly poured into the wok with the washing basket to avoid secondary pollution and more convenient.
4. Easy maintenance and economy
The disinfection effect can be achieved without various disinfecting detergents, and the use cost is low.
Why vegetable washing machine need ozone
The vegetable washing machine we usually use requires ozone, and it has three functions of decomposing pesticides, hormones, and toxins, separating heavy metal ions, preserving and deodorizing functions, so Xiaobian says about ozone in the vegetable washing machine. Role:
1. Decompose pesticides and hormones and toxins
Ozone is highly oxidizing, rapidly oxidizing pesticides and hormone molecular chains, turning pesticides and hormones into stable inorganic compounds; sterilization and disinfection: single atoms in ozone have strong permeability and rapidly oxidize the cell walls of bacteria and viruses. Producing inorganic compounds for sterilization and disinfection purposes;
2. Separation of heavy metal ions
Oxygen atoms in ozone can oxidize heavy metal ions dissolved in water into non-toxic and high-valent compounds insoluble in water, and precipitate and separate them;
3, preservation, deodorization function
Vegetables washed with ozone water or vegetables blown with ozone gas can extend the fresh-keeping period by 2-3 times. Ozone gas can remove the unpleasant smell of the bathroom, except for the smell of fish in the kitchen and the smell of mildew in rice.
Vegetable washing machines use these effects of ozone to clean vegetables very cleanly.
more about vegetable washing machine
1. Decompose pesticides and hormones and toxins
Ozone is highly oxidizing, rapidly oxidizing pesticides and hormone molecular chains, turning pesticides and hormones into stable inorganic compounds; sterilization and disinfection: single atoms in ozone have strong permeability and rapidly oxidize the cell walls of bacteria and viruses. Producing inorganic compounds for sterilization and disinfection purposes;
2. Separation of heavy metal ions
Oxygen atoms in ozone can oxidize heavy metal ions dissolved in water into non-toxic and high-valent compounds insoluble in water, and precipitate and separate them;
3, preservation, deodorization function
Vegetables washed with ozone water or vegetables blown with ozone gas can extend the fresh-keeping period by 2-3 times. Ozone gas can remove the unpleasant smell of the bathroom, except for the smell of fish in the kitchen and the smell of mildew in rice.
Vegetable washing machines use these effects of ozone to clean vegetables very cleanly.
more about vegetable washing machine
Tuesday, April 9, 2019
Prospects for plastic granulator manufacturers
Prospects of plastic granulator manufacturers, plastic chemical raw material prices As the economic development continues to rise, the government is vigorously promoting the development and transformation of the plastic recycling granulator industry, and the huge market demand, also makes the market of recycled plastic granulator More and more optimistic, policy support is a favorable guarantee for the development of recycled plastic granulators. In addition, the advantages of recycled plastic granulators make it sustainable, and recycled plastic granulators have broad development space in China.
The design concept of plastic granulator has undergone major changes again. A complete three-dimensional, systematic service plan has been introduced, which has brought more benefits to the customers while bringing warfare to the machinery manufacturers. International plastic granulators are supplied to the market with a full set of process solutions. The manufacture of plastic granulators has made a strategic transformation of service-oriented manufacturing, and service-oriented manufacturing has evolved from “low-end” to “high-end”. The high-end concept refers to the high-end of the international industrial division of labor value chain. For example, the high-end of plastic granulator manufacturing is only understood as the technological advancement of a single device, and it will lead to the industrial road.
The manufacture of high-end plastic granulators is a complete solution for the “potential demand” of plastic products in related fields/industries. The innovative plastic forming technology and equipment are derived from the “potential needs” of related fields/industries. R&D in the process. If only plastic pellet machine equipment is manufactured, it must be at the low end of the value chain, and most of the added value is owned by the full solution of the "potentially demanding" plastic pellets. Service-oriented manufacturing indicates that high-end plastic granulator manufacturing refers to the high-end plastic granulator in the value chain of the complete solution, highlighting its molding processing capabilities and is the standard for measuring the technical level of plastic granulators. Some have only misunderstood the technological progress of plastic granulators as the use of certain new technologies, new manufacturing methods, new testing methods, and new matching parts on the original equipment, and there is no substantial technological advancement in the molding processing capability. It is just to provide better equipment for the full solution provider, still at the low end of the value chain.
1. At present, the recycling rate of waste plastics in China is not high, and there are not many waste plastic recycling factories, especially the uneven distribution. Most of the places are almost blank. On the other hand, in recent years, China has developed rapidly and the market is prosperous. The large plastics market has already Dozens of waste plastic pellets have been in short supply, and prices have risen and then risen. Therefore, waste plastic pellet processing will become a hot spot for future development. As the main processing machine, recycled plastic pelletizers will have a large customer base.
Second, the plastic recycling granulator processes the waste plastics of daily life to regenerate the plastic raw materials needed by the enterprise. The price of recycling waste plastics is far cheaper than the price of plastic raw materials that have been rising in recent years. With the strong support of the state. The new type of recycled plastic granulator is continuously optimized and updated to achieve full, firm and smooth recycled plastic raw materials. Therefore, it will be favored by more and more businesses.
Third, due to the small risk of the establishment of recycled plastic pellets, the scale of investment can be large, and the entrance to the door is also low, you can start from a production line, or you can purchase multiple sets of equipment at the same time. But the profits are higher so there will be more factories in the future, which is undoubtedly a huge business opportunity for recycled plastic granulator equipment manufacturers.
Please pay attention to our website for more details:
https://www.recycle-plant.com/plastic-granulator-machine.html
The design concept of plastic granulator has undergone major changes again. A complete three-dimensional, systematic service plan has been introduced, which has brought more benefits to the customers while bringing warfare to the machinery manufacturers. International plastic granulators are supplied to the market with a full set of process solutions. The manufacture of plastic granulators has made a strategic transformation of service-oriented manufacturing, and service-oriented manufacturing has evolved from “low-end” to “high-end”. The high-end concept refers to the high-end of the international industrial division of labor value chain. For example, the high-end of plastic granulator manufacturing is only understood as the technological advancement of a single device, and it will lead to the industrial road.
The manufacture of high-end plastic granulators is a complete solution for the “potential demand” of plastic products in related fields/industries. The innovative plastic forming technology and equipment are derived from the “potential needs” of related fields/industries. R&D in the process. If only plastic pellet machine equipment is manufactured, it must be at the low end of the value chain, and most of the added value is owned by the full solution of the "potentially demanding" plastic pellets. Service-oriented manufacturing indicates that high-end plastic granulator manufacturing refers to the high-end plastic granulator in the value chain of the complete solution, highlighting its molding processing capabilities and is the standard for measuring the technical level of plastic granulators. Some have only misunderstood the technological progress of plastic granulators as the use of certain new technologies, new manufacturing methods, new testing methods, and new matching parts on the original equipment, and there is no substantial technological advancement in the molding processing capability. It is just to provide better equipment for the full solution provider, still at the low end of the value chain.
1. At present, the recycling rate of waste plastics in China is not high, and there are not many waste plastic recycling factories, especially the uneven distribution. Most of the places are almost blank. On the other hand, in recent years, China has developed rapidly and the market is prosperous. The large plastics market has already Dozens of waste plastic pellets have been in short supply, and prices have risen and then risen. Therefore, waste plastic pellet processing will become a hot spot for future development. As the main processing machine, recycled plastic pelletizers will have a large customer base.
Second, the plastic recycling granulator processes the waste plastics of daily life to regenerate the plastic raw materials needed by the enterprise. The price of recycling waste plastics is far cheaper than the price of plastic raw materials that have been rising in recent years. With the strong support of the state. The new type of recycled plastic granulator is continuously optimized and updated to achieve full, firm and smooth recycled plastic raw materials. Therefore, it will be favored by more and more businesses.
Third, due to the small risk of the establishment of recycled plastic pellets, the scale of investment can be large, and the entrance to the door is also low, you can start from a production line, or you can purchase multiple sets of equipment at the same time. But the profits are higher so there will be more factories in the future, which is undoubtedly a huge business opportunity for recycled plastic granulator equipment manufacturers.
Please pay attention to our website for more details:
https://www.recycle-plant.com/plastic-granulator-machine.html
Subscribe to:
Posts (Atom)