Principle and characteristics of garlic peeling machine
The dry garlic peeling machine uses compressed air as the production power. After adopting the specially designed peeling principle, during the peeling process, the garlic clove does not pass through the blade and the hardness friction, so that the garlic is naturally peeled, ensuring that the garlic is not damaged, the surface is smooth, and there is no pollution. Through the control of electricity and gas, the garlic guide, peeling and discharging are automatically completed.
Features:
◆The high degree of automation, one person can operate multiple units at the same time;
◆There is no water in the work process and no pollution to the environment;
◆ The garlic removal rate is high;
◆In the process of peeling garlic, it is not limited by the size of garlic cloves, and it can be processed without sorting;
◆Stable performance, practical, safe, easy to operate and maintain.
Garlic peeling machine application
Dry garlic peeling machine--is a garlic peeling machine invented by Shandong Zhucheng Dayang Food Machinery Factory. This product leads to the latest domestic technology, and the products sell well all over the country. The customers are located in large, medium and small cities all over the country, and exported to USA, UK, Canada, Australia, Malaysia, Indonesia, Japan, Korea, Vietnam, Bangladesh, Saudi Arabia, North Korea, Russia. , Iraq, Iran, Syria, Egypt, Thailand, Nigeria, Mexico, and other countries. Our factory is an enterprise integrating R&D, manufacturing, production, and sales, with comprehensive strength, and its production and sales rank among the best in the industry.
. Widely used in vegetable processing plants, condiments, instant noodle factories and self-employed households in large vegetable wholesale markets.
Wednesday, July 10, 2019
Thursday, July 4, 2019
Egg tray machine production line control requirements
The egg tray production line requires machine, electrical integration, high degree of automation in the production process, safe and reliable operation, and the whole process basically realizes unmanned operation. Due to the complicated process of the egg tray machine production line, the operating environment on the site is relatively humid, and the equipment has certain equipment. Corrosion, input
The number of output I/O points is large, and the field failure rate is required to be low and the reliability is high. According to the process flow and control requirements (action sequence cycle is the main), the programmable controller can be used instead of the single chip as the core component of the control system.
The control technology of the egg tray machine production line is mature, and the whole egg tray machine production line runs stably and has high safety. At present, Haichuan Machinery will mainly push ZJ6000-12M5 automatic egg tray machine. This machine is a 12-face egg tray machine. It is more stable and mature in the control technology of egg tray production line. At present, the equipment has been exported to foreign countries in large quantities. , 12-side egg tray machine configuration metal multi-layer metal drying line is the customer's first choice!
Preparation of slurry in egg tray production line process
The raw material for the production of egg tray products is waste paper pulp or commercial paperboard. The requirements for pulp in the egg tray production line process are: rapid and uniform and unobstructed deposition on the mesh mold, and the overall shrinkage rate of the egg tray products during drying is low. The egg tray product does not produce any significant warpage in all directions. Due to the use of the function, it is necessary to add a functional preparation.
The pulping process of the egg tray production line is crucial to the performance of the product. The pulping process originates from the pulping process of the paper mill, but it is different from the modified process, the fiber requirements of the pulp molded product, the addition of the auxiliary agent and the papermaking. Not exactly the same. If the fiber product does not meet the requirements of the pulp molded article, it will affect the strength and cushioning properties of the pulp molded article. The water pulper disintegrates waste newspapers, corner scraps of corrugated cardboard packaging, etc., and the strip-like impurities such as bundles are wound around the noose machine to be removed and removed. The heavy-duty trap at the bottom of the hydropulper performs regular discharge to remove heavy dirt. The disintegrated crude pulp is stored in the slurry tank, sent to the Gaoning slag remover through the slurry pump, and the good pulp is sent to the reciprocating fiber separator for further screening, separation, and dissolving. For example, pulp molding industrial packaging products with low pulp beating requirements can eliminate the process of beating or refining.
The egg tray production line in the production process of the entire production line, the preparation of the slurry, the slurry distribution technology directly affects our finished products, and the real learning of the preparation technology of the slurry requires at least the technical personnel to actually operate on our production line. More than a year, you can truly master the preparation technology of the slurry.
Monday, June 24, 2019
Description of pulp mold products for egg tray machine
The product egg tray machine uses pulp board or commodity to produce raw materials. The egg machine requirements in the pulp production process are: it can be quickly and uniformly deposited on the mesh mold, and the dried egg product DE reduces the shrinkage rate overall. The egg tray products are not in all directions. Will produce any noticeable warpage. Functional formulations need to be added to achieve function.
The function of the egg tray machine pulp molding product is to package and protect the packaged product, which is convenient and practical.
Egg tray tolerance and protective packaging products are the primary functions of pulp molded products. Molded pulp products should be able to reliably package the packaged product, which is damaged during transportation, handling, use, and its strength, stiffness, and stability requirements. The materials used in pulp molded products are also safe for packaging products and they do not interact.
The egg tray machine is convenient to use, that is, the structure of the pulp molded product should have appropriate humanity. The structure and shape of the pulp molded product should not harm the human body and should be adapted to human operation and operation.
Then, the egg machine pulp molding product is extended by the special structure after the modification to absorb the energy, thereby reducing the impact and vibration of the package. It is different from the buffering mechanism of foam packaging products. Because of the foam product, it has a large amount of compressible material due to the internal distribution of the bubble holes, and it has good cushioning properties regardless of the shape of the product if pulp plastic film material and foam are used separately. In the large plane, the former is obviously buffered, and the latter is not buffered. Therefore, for the pulp plastic film product, the good structural design is to improve the damping capacity within its complete protection range. Transportation process and basic guarantee processing. The structural performance of the egg tray machine design directly affects the strength, rigidity, stability, and practicability of the package, that is, the structure of the pulp molded product will directly affect the realization of its packaging function.
Egg tray machines have been used as pulp materials for many years. It has good protection and low price and has become an ideal product for packaging egg and fruit products. The main raw material for selecting pulp with egg tray machine equipment is waste paper, which is rich in source and low in price, and belongs to the comprehensive development and utilization of waste materials. The water production process is a closed cycle. There is no wastewater, exhaust gas, pulp molding products are used. After the waste is completed, it can be recycled as plain paper, even in the natural environment, because the paper is easily broken down into organic Substance, a completely environmentally friendly product.
The function of the egg tray machine pulp molding product is to package and protect the packaged product, which is convenient and practical.
Egg tray tolerance and protective packaging products are the primary functions of pulp molded products. Molded pulp products should be able to reliably package the packaged product, which is damaged during transportation, handling, use, and its strength, stiffness, and stability requirements. The materials used in pulp molded products are also safe for packaging products and they do not interact.
The egg tray machine is convenient to use, that is, the structure of the pulp molded product should have appropriate humanity. The structure and shape of the pulp molded product should not harm the human body and should be adapted to human operation and operation.
Then, the egg machine pulp molding product is extended by the special structure after the modification to absorb the energy, thereby reducing the impact and vibration of the package. It is different from the buffering mechanism of foam packaging products. Because of the foam product, it has a large amount of compressible material due to the internal distribution of the bubble holes, and it has good cushioning properties regardless of the shape of the product if pulp plastic film material and foam are used separately. In the large plane, the former is obviously buffered, and the latter is not buffered. Therefore, for the pulp plastic film product, the good structural design is to improve the damping capacity within its complete protection range. Transportation process and basic guarantee processing. The structural performance of the egg tray machine design directly affects the strength, rigidity, stability, and practicability of the package, that is, the structure of the pulp molded product will directly affect the realization of its packaging function.
Egg tray machines have been used as pulp materials for many years. It has good protection and low price and has become an ideal product for packaging egg and fruit products. The main raw material for selecting pulp with egg tray machine equipment is waste paper, which is rich in source and low in price, and belongs to the comprehensive development and utilization of waste materials. The water production process is a closed cycle. There is no wastewater, exhaust gas, pulp molding products are used. After the waste is completed, it can be recycled as plain paper, even in the natural environment, because the paper is easily broken down into organic Substance, a completely environmentally friendly product.
Automatic egg tray machine pulp molding
The main raw material of the pulp egg tray machine is waste paper. The production process of water is a closed cycle. There is no wastewater, exhaust gas, pulp molding products are used. After the waste is completed, it can be recycled as ordinary paper, or even discarded in the natural environment. For example, the ordinary paper is easy to decompose organic matter. Environmentally friendly quality products.
The egg tray machine is the egg tray produced by the machine. It is the key process. It has a decisive effect on the quality, breakage, production energy consumption and production power of the egg tray. According to the principle of the egg tray in the dehydrator, there are three kinds of egg products. The forming method is: vacuum forming in hydroforming and compressed air forming.
The drying method of the egg tray machine is used to dewater and dry the wet egg rack made of machine. The drying method of pulp egg tray machine can be divided into two types: civil and steel structure drying methods. These two drying methods each have their own characteristics and advantages. This is a short introduction. The civil drying method is a long passage covered with bricks that uses heat from burning coal or gas to remove water from the egg rack. The advantages of dry roads in civil buildings are low cost, low investment, and economic durability. Egg storage machines are welcomed by domestic customers. The advantage of the egg washing machine is the rugged internal drying method.
The two parts of the egg machine electrical control system, the electronic control part of the operation is simple, but the stop in the electrical appliance is a bit complicated, there are one or two proximity switches to control the time delay and the time relay to control the motor to stop and turn;
If the proximity switch or time relay fails, the machine cannot complete the work, so the fewer electrical devices, the lower the failure rate.
Another part of the electric control solenoid valve and the cylinder portion of the eggbeater, each solenoid valve has a proximity switch control, the cylinder has a proximity switch control solenoid valve and a solenoid valve control cylinder;
The cylinder of the egg tray machine again controls the dewatering valve to form a mutual restriction of the four parts.
As the price of the equipment, the egg tray has a unique place in the production process. Now we are still a common pulp egg tray. The production technology is mainly used for the egg tray machine of the pulping machine. During the operation of the production line, the molding quality of egg tray production is closely related to many factors and professional technical training and guidance for technical requirements!
The egg tray machine is the egg tray produced by the machine. It is the key process. It has a decisive effect on the quality, breakage, production energy consumption and production power of the egg tray. According to the principle of the egg tray in the dehydrator, there are three kinds of egg products. The forming method is: vacuum forming in hydroforming and compressed air forming.
The drying method of the egg tray machine is used to dewater and dry the wet egg rack made of machine. The drying method of pulp egg tray machine can be divided into two types: civil and steel structure drying methods. These two drying methods each have their own characteristics and advantages. This is a short introduction. The civil drying method is a long passage covered with bricks that uses heat from burning coal or gas to remove water from the egg rack. The advantages of dry roads in civil buildings are low cost, low investment, and economic durability. Egg storage machines are welcomed by domestic customers. The advantage of the egg washing machine is the rugged internal drying method.
The two parts of the egg machine electrical control system, the electronic control part of the operation is simple, but the stop in the electrical appliance is a bit complicated, there are one or two proximity switches to control the time delay and the time relay to control the motor to stop and turn;
If the proximity switch or time relay fails, the machine cannot complete the work, so the fewer electrical devices, the lower the failure rate.
Another part of the electric control solenoid valve and the cylinder portion of the eggbeater, each solenoid valve has a proximity switch control, the cylinder has a proximity switch control solenoid valve and a solenoid valve control cylinder;
The cylinder of the egg tray machine again controls the dewatering valve to form a mutual restriction of the four parts.
As the price of the equipment, the egg tray has a unique place in the production process. Now we are still a common pulp egg tray. The production technology is mainly used for the egg tray machine of the pulping machine. During the operation of the production line, the molding quality of egg tray production is closely related to many factors and professional technical training and guidance for technical requirements!
Thursday, June 6, 2019
Large-scale shell charcoal machine equipment
Large-scale fruit-shell charcoal machine equipment uses sawdust, branches, husks, liqueurs, peanut shells and other crop straws as materials, which realizes renewable resources to ensure environmental protection and energy conservation, and promotes a new era of green development of the charcoal machine industry. Large-scale fruit-shell charcoal machine equipment basically does not have any pungent pollution to the air during the production process. Based on the design, it is mainly based on environmental protection and energy conservation. This is one of the reasons why the British charcoal machine equipment sells well.
The clean charcoal produced by the large-scale charcoal machine has high carbon content, low ash content, high strength, and good thermal conductivity. The calorific value can reach more than 8000 kcal. The strong and effective utilization value can help solve the problem of fuel used in various regions. It can be stored better and is suitable for long-term efficient use of energy.
Large-scale fruit-shell charcoal machine equipment provides you with a new carbon-making process. How to quickly achieve social energy-saving development and environmental governance under the leadership of new technologies and new energy has become the development concept advocated in China.
Large-scale fruit-shell charcoal machine equipment is process equipment for crushing, drying, forming and carbonizing various wood straw crops, branches, waste wood, and sawdust. The use of the machine can effectively save social resources and improve the utilization efficiency of waste resources. The purpose of common progress in economic growth and environmental governance.
How to make high-density charcoal in the large-scale charcoal machine?
First, the rod made by the carbon making mechanism has a density. If the stick is broken, it has a gloss on the broken side: it means that the initial position of the spiral front is too high;
Second, the same raw materials used in different rod making machines have a world of difference: the reason for this is that the gap between the screw and the sleeve is not suitable;
Third, in the production of sticks, there are often phenomena such as shooting, abnormal sticking or slow speed, blocking eyes, etc.: The reason for this phenomenon is that the front of the spiral is seriously worn, and the root of the spiral front or the sleeve is seriously worn;
Fourth, the screw is too short or worn, it will cause no rod and the screw will idle;
5. If the raw material of the rod is not dried and the humidity is high, the rod produced will be bent; the rod is not screwed out and the screw is screwed: the temperature is too low, the spiral is too short or worn.
more about charcoal machine
Small sawdust charcoal making machine equipment
The small sawdust charcoal making machine uses hardwood sawdust as raw material, and the moisture requirement of the raw material must be controlled within 12%. The small sawdust charcoal making machine equipment has higher requirements on the moisture content of the raw material in the production process. The moisture is generally between 6% and 12%. If the moisture content is <6%, the conversion of raw materials and viscosity are poor, the rods are not strong; if the water content is >12%, the rods are soft and easy to bend and cracks easily, and the density is small.
The moisture content of the raw material is roughly identified by observation and difficulty. First of all, we touch the working separator shell by hand, and the temperature makes the hand feel hot. Secondly, the color of the material just coming out is required to be yellow; * Grab a handful of material and grab it with a palm. Then, let go and let go, and ask for all the raw materials to be scattered. From the actual production experience, it is considered from this point of view whether the moisture content of the raw materials is recognized.
Drying the raw materials of small sawdust charcoal making machine will save more time for our carbon making work, so users who invest in small sawdust charcoal making machine equipment must pay special attention to the mechanism of charcoal technology. The characteristics of the small sawdust charcoal making machine manufactured by Shuliy Machinery are as follows:
The small sawdust charcoal making machine has reasonable design, reliable manufacturing quality, simple structure, convenient operation, small volume, small footprint, labor saving and power saving. The fully automatic control electric heating device designed by the small sawdust charcoal making machine can randomly adjust the dry humidity of the material to ensure stable discharge forming and improve work efficiency.
The main part of the small sawdust charcoal making machine is specially treated with wear-resistant materials, so it can be continuously pressed and produced. It is suitable for press forming of various biomass raw materials and has low energy consumption and high production efficiency. The three bearings of the old-fashioned movement are four, which increases the stability and durability of the machine. Old-fashioned oil-based lubrication is oil-immersed lubrication, as long as it is not short of oil, it can be used for many years. Increasing the pitch increases the amount of feed, which greatly increases the output. The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.
The moisture content of the raw material is roughly identified by observation and difficulty. First of all, we touch the working separator shell by hand, and the temperature makes the hand feel hot. Secondly, the color of the material just coming out is required to be yellow; * Grab a handful of material and grab it with a palm. Then, let go and let go, and ask for all the raw materials to be scattered. From the actual production experience, it is considered from this point of view whether the moisture content of the raw materials is recognized.
Drying the raw materials of small sawdust charcoal making machine will save more time for our carbon making work, so users who invest in small sawdust charcoal making machine equipment must pay special attention to the mechanism of charcoal technology. The characteristics of the small sawdust charcoal making machine manufactured by Shuliy Machinery are as follows:
The small sawdust charcoal making machine has reasonable design, reliable manufacturing quality, simple structure, convenient operation, small volume, small footprint, labor saving and power saving. The fully automatic control electric heating device designed by the small sawdust charcoal making machine can randomly adjust the dry humidity of the material to ensure stable discharge forming and improve work efficiency.
The main part of the small sawdust charcoal making machine is specially treated with wear-resistant materials, so it can be continuously pressed and produced. It is suitable for press forming of various biomass raw materials and has low energy consumption and high production efficiency. The three bearings of the old-fashioned movement are four, which increases the stability and durability of the machine. Old-fashioned oil-based lubrication is oil-immersed lubrication, as long as it is not short of oil, it can be used for many years. Increasing the pitch increases the amount of feed, which greatly increases the output. The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.
Subscribe to:
Posts (Atom)