The development of charcoal machine equipment marks the advancement of science and technology

The new machine-made charcoal briquette equipment has the magical power of turning waste into treasure, making full use of all available agricultural and forestry resources, through the high-temperature and high-pressure machine-made charcoal salary bar of the bar machine, and then the high-temperature purification of the carbonization furnace equipment. In addition to smoke, the semi-waste can be converted into a smokeless, tasteless, non-toxic hexagonal hollow rod.

Our machine-made charcoal briquette machines all introduce advanced foreign technology, deep processing, and transformation of each machine of traditional charcoal briquette machine. A qualified machine-making machine in the new machine-made charcoal briquette machine is especially important. The technical requirements of the bar machine are also very strict, so we must strictly follow the production technology of the bar machine to produce a qualified machine-made salary bar.

The machine-made charcoal produced by the new machine-made charcoal briquette equipment is smoke-free, non-toxic, odorless, high-quality environmentally-friendly green energy charcoal, which has excellent protection against the environment and will not cause pollution after burning. Therefore, we must Constantly strengthen this knowledge and protecting the common environment can further promote economic development.

The new machine-made charcoal briquette machine is fully automatic production equipment with strong production capacity and high output, which can easily meet market demand. This is very important for charcoal producers. Machine-made charcoal is a kind of green. The environmentally friendly fuel is in sharp contrast with the previous raw charcoal. In terms of quality, machine-made charcoal is pressed at high temperature and compacted to a high degree of compactness. It is resistant to fuel and has a large amount of heat. The original charcoal is fired and has low compactness. Therefore, the durability is far worse than machine-made charcoal.

Rotary dryer equipment drying materials

The small rotary dryer equipment is to make full use of the wood waste residue from the wood processing. These things are worthless to ordinary people, but the sawdust dryer can transform these inconspicuous things into raw Material fuel or wood product base material.

The use of small rotary dryer equipment is simple and can be used by both self-employed and enterprises. Rotary drying is also a good entrepreneurial project, which can not only increase the income of farmers but also reduce the pollution of the environment to a certain extent. The small rotary dryer equipment has reasonable planning, high output, low failure rate, and easy operation and protection.

1. The combination of material and moisture is the factor for determining the difficulty of boring. Together, it also determines the energy consumption level and the length of time spent in the interior of the small rotary dryer equipment. This situation is related to small rotary drying. The selection of machine equipment is inseparable. For example, for some materials that are not easy to be boring, it is mainly necessary to give a longer staying time instead of strengthening the external boring conditions.

2, the shape of the material, the material can exist in a variety of shapes, such as large-scale molded wood, ceramic products or other sheet-like, fiber pile, granular, or even liquid materials, these can As a boring material in the industry, the selection of small rotary dryer equipment should also be considered according to the shape of the material.

3, the material itself has some physical characteristics, the physical properties of the material itself generally have density, bulk density, hot melt, and the adhesion of the material, etc., can be the adhesion of the bump, it is small rotary The operation of the dryer equipment has a direct impact, and when the adhesion is severe, the boring process cannot be carried out.

4, the demand to pay attention to the material in the boring process of some matters, these factors mainly have the heat sensitivity of the heat of time, some materials will change some changes when heated, such as discoloration, decomposition and transformation, etc., other materials in the boring process due to Shortening will cause the material to deform or crack, and then the quality of the material will be reduced or even invalidated.

Technical analysis of continuous carbonization furnace smoke remover

The continuous carbonization furnace component is composed of a furnace body connected by a combustible gas pipeline and a flammable gas treatment part, the former includes an upper cracking chamber, a middle semi-cracking semi-calcining chamber, a lower calcining chamber, and a bottom burner, and the latter includes a raw Material gasifier, soot processor, combustible gas purifier, combustible gas condenser, and induced draft fan. The continuous carbonization furnace is mainly for the treatment of sawdust and the speed is fast; the carbonization effect of the equipment is good.

        The working principle of continuous carbonization furnace:

        1. When the carbonization furnace is started (first feeding), when heating, a heat source heating carbonization furnace is required.

        1 One is to use the hot gas stream generated by the reverberatory furnace to carry out combustion carbonization to achieve the purpose of heating and carbonization.

        2 The other is to use a gasifier device to ignite the sawdust through a gasifier and combust the gas produced by gasification to burn carbonization to achieve the purpose of heating and carbonization (the gasified sawdust is carbonized by the carbonized carbon powder output device). The carbon powder is passed through, and the combustible gas is recovered by the wood tar recovery device).

        2. When the carbonization temperature reaches a certain temperature, the combustible gas generated inside is separated by the dust separator, and the combustible gas after the dust separation is recovered by the wood tar recovery device.

        3. After the carbonization and heating of the self-produced gas, the reverberatory furnace heating or the gasifier gas production device stops working at this time, and the preliminary heating equipment is finished.

        4. After carbonization for about 2-3 hours (different time and temperature), the carbon powder slowly flows from the carbonization into the carbonized carbon powder cooler and flows out from the cooler. The equipment can be produced continuously without interruption.

        5, wood tar is an important chemical raw material, wood tar contains more than 300 kinds of chemical elements, this equipment will automatically discharge wood tar.

        Shuliy's environmentally friendly carbonized de-ice remover not only completely removes the smoke from the carbonization furnace itself, but also recycles the smoke, which not only meets the customer's environmental standards but also saves energy. This cigarette remover was launched by the majority of customers. More smokeless charcoal smoke processor expertise login:https://charcoalmachines.com/continuous-carbonization-furnace/

How long can the carbonization furnace be used?

Shuliy's new environmentally friendly carbonization furnace has the dual function of one machine, the material can also be directly carbonized, or it can be carbonized after pressing the block. The charcoal can be carbonized raw materials: sawdust, branches, rice husks, bamboo chips, peanut skin, sunflower seed shell, furfural residue, wine residue, bagasse, corn cob, coconut shell, coffee grounds, and crop straw. After the crusher is crushed, it is placed in a carbonization furnace for fully enclosed carbonization into carbon powder and then extruded into carbon dioxide by a carbon powder coal bar machine. This project is an ideal product with less investment and quick effect.

Environmentally friendly charcoal can be industrial carbon, silicon plant, activated carbon plant, carbon can be used for silicon, civil heating, barbecue, industrial water purification, and smelting.

The working principle of the environmentally friendly smokeless carbonization furnace is to use the principle of dry distillation carbonization to decompose and decompose the fuel rod in the furnace to produce combustible gas, tar, and charcoal. The utility model adopts a mobile steel plate structure, and the exhaust pipe at the top of the furnace is sequentially connected with the tar separator and the induced draft fan, and has the advantages of unique structure, large effective volume, advanced carbonization process, short cycle, high output, good environmental protection, and long service life. .

The environmentally-friendly e-cigarette tank newly developed by Shuliy Machinery can remove the flue gas such as wood tar generated during carbonization by chemical and physical methods, greatly reducing the emission of fumes in the air and eliminating pollution! The new environmentally-friendly carbonization furnace adds a flue gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, the dust can be smokeless. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and drying. use.

more about carbonization furnace

https://charcoalmachines.com/continuous-carbonization-furnace/

What should we pay attention to when Charcoal or Coal briquette machine is produced?

We must pay attention to safe production during the production process of Charcoal or Coal briquette machine. Let's talk to our customers and friends in detail:

        1. Check the lubrication of the equipment and the tightness of the V-belt before starting the machine.

        2. Adjust the amount of coal and the moisture of the material according to the index of the ammeter. Ensure that the moisture content of the material is controlled at 12%-14% to ensure the forming strength of the coal rod.

        3. When Charcoal or Coal briquette machine is working, the operator should control the amount of coal to be fed to avoid material breakage or overfeed. It is strictly forbidden to stand at 10m in front of the head of the molding machine to avoid spraying and injuring people.

        4. It is forbidden to use materials such as iron rods and high hardness tools in Charcoal or Coal briquette machine to avoid being damaged by Charcoal or Coal briquette machine. When the stick is stirred in, immediately let go, so as not to hurt people, and stop cleaning.

        5. When the head hole is blocked, it should be cleared at any time.

        6. Charcoal or Coal briquette machine should empty the material when it is out of service for more than 2 hours. And add a small amount of water when you re-drive.

        7. Before installing the machine head, clean the coal on both ends of the machine head and the discharge shell assembly, and then install the clamping device.

        8. If the startup is unsuccessful twice during the start of the drive, the start should be stopped. To find out the cause, drive again after troubleshooting. It is these eight procedures that help the safe production of the Charcoal or Coal briquette machine.

How can a carbonized branch sawdust be pressed?

How do you make charred tree sawdust into a sheet or a sphere? The charcoal block made will have a lower burning value than other materials.

Machine-made charcoal making machine equipment generally first pulverizes the raw materials, then presses the block (this process does not require the addition of binder), and finally carbonizes into a machine-made charcoal piece or another shape through a carbonization furnace, which is the first briquetting block. The principle of post-carbonization. Most people also use this manufacturing process.

Another process of forming after carbonization

After the charcoal sawdust is first carbonized, it can be pulverized by a pulverizer to a suitable granule, and then the ash is added to the binder and pressed through a briquetting machine or hookah charcoal making machine. The purpose of deashing is to maintain heat. value. This principle is to form after carbonization. The principle is different for different processes, but the constant value is the combustion value. Branches and sawdust can be said to be one of the best and the easiest to form in raw materials. So don't worry about its low combustion value.

Charcoal making machine equipment correct installation method

The charcoal making machine is a machine in which raw materials such as bamboo sawdust, peanut shells, corn cobs, etc. are pulverized into a pellet of 10 mm by a wood chip crusher, dried by a dryer, and then placed in a carbonization furnace for carbonization. The charcoal production machine produces charcoal with high density, small volume and good flammability, which can replace fuelwood and coal.

This product is especially suitable for heating and heating in the autumn and winter in the northern region, warming the greenhouse or making ordinary living fuel. The complete set of charcoal making machine includes a rod making machine, a carbonization furnace, a dryer, and other equipment. The following is the correct charcoal making machine installation and operation method provided by Runhe Charcoal Machine Factory:

         1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

         2, the installation should pay attention to the horizontal and vertical of the host and the ground.

         3. After installation, the parts of the body should be tested according to the parts, and the fixing devices such as screws should be secondarily reinforced.

         4. Power on and off the power supply line and control switch of the device.

         5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.